Operation
$ su
enter the root password at the Password: prompt
#cd /tmp
#pkgadd
Then simply follow the instructions provided by the installation script to complete the installation of the driver.
SCO UNIX LLI Driver
The Trumpcard LLI Driver is a Network driver and enabler for Intel, Databook and compatible PCMCIA equipped computers. With this driver installed networking functions will be available under SCO UNIX.
The Trumpcard LLI driver requires that the Trumpcard PC Card be inserted prior to the driver being loaded. If no Trumpcard is found, the driver will not be loaded and networking functions will NOT be available. When the driver has successfully loaded, unpredictable results will occur if the Trumpcard is now removed from the PCMCIA slot. The Trumpcard LLI Driver DOES NOT support hot insertion and removal.
To install the Trumpcard LLI driver, you need to create an Ositech LLI Driver Disk using the INSTALL shell script from the DOS formatted Network Drivers distribution diskette provided with the adapter. The first step is to copy the INSTALL shell script to the UNIX /tmp directory from the distribution diskette \UNIX\SCO directory. If you do not have the DOS file system support installed on your UNIX system, then you must also copy the osi_sco.tar file to the /tmp directory. If you wish to install the DOS file system support, then execute the UNIX command “mkdev dos” as the root user, and reboot your machine.
The installation process performed by the INSTALL shell script consists of three basic steps:
1)Creating the Ositech LLI Driver Disk from the compressed disk image extracted from the osi_sco.tar archive.
2)Second, installing the driver from the Ositech LLI Driver Disk using the custom utility.
3)Binding the Network software to the Trumpcard driver using netconfig.
Note: | If the Trumpcard is a |
| required to complete the full installation. Refer to the Installation Guide |
| accompanying the PC Card for more details. |
| In order to successfully complete the installation process the following is |
| required: |
User’s Guide and Reference | 3 - 21 |