Appendices
APPENDIX B – NDIS Keywords
The following NDIS keywords are supported by the Trumpcard NDIS drivers. The keywords must be in the PROTOCOL.INI file under the section with a DriverName = OTCETH$. If the keyword is not present the default value shown will be assumed.
MEDIA= <media type>
| Description: Media type selected by the driver |
| Default: AUTO |
| Accepted Values: BASE2 , BASET, AUTO |
Note: | If you are using the dual media Trumpcard network PC Card, setting |
| this keyword to Base2 or BaseT will force that media type connection |
| only. By default, the driver will try to determine which media is |
| connected by first trying BaseT and then Base2. |
MEM= <memory location>
| Description: Maps to 4K host memory location |
| Default: 0xC800 |
Note: | When Card Services is not present (the only scenario in which this |
| keyword applies), the Trumpcard driver will require the 4K memory |
| window in order to determine the Trumpcard’s presence. If running a |
| memory manager (such as EMM386 or QEMM), make sure to exclude |
| the memory range used, i.e. |
EXCLUSIVE
| Description: Put Trumpcard in LAN only mode |
| Default: |
Note: | If the Trumpcard is a |
| disable the other function as long as the network driver is loaded. If |
| the other function is already in use, the driver will report an error. |
DISLINK
| Description: Disable link poll mode |
| Default: Enable link |
Note: | This keyword is used to disable the Link Test Function on 10BaseT |
| network connection only. |
User’sGuideandReference | 4 - 5 |