Ositech comm 614006-001 manual INT interrupt level, MEM memory location, Port I/O port

	Appendices
Note:	This keyword is used to disable the Link Test Function on a 10BaseT
	network connection only.

INT <interrupt level>

	Description: Set the interrupt level
	Default: 5 or AUTO
	Accepted values: Any valid interrupt value excluding 0, 1, 2, 6, 8, and 13
Note:	If this keyword exists, the driver will return an error when unable to
	operate using the specified interrupt. If the keyword does not exist, the
	default interrupt level will be 5 if Card Services is not present;
	otherwise, the first available interrupt obtained from Card Services will
	be used.

MEM <memory location>

	Description: Maps to 4K host memory location
	Default: C8000
Note:	When Card Services is not present (the only scenario in which this
	keyword applies), the Trumpcard driver will require the 4K memory
	window in order to determine the Trumpcard’s presence. If running a
	memory manager (such as EMM386 or QEMM), make sure to exclude
	the memory range used, i.e. X=C800-C8FF

PORT <I/O port>

	Description: Set the I/O port
	Default: 300 or AUTO
	Accepted values: Any location within a 64 byte boundary (300 and up in
	increments of 40, with the upper limit dictated by the individual machine)
Note:	If this keyword exists, the driver will return an error if unable to operate
	using the I/O port specified. If the keyword does not exist, the default I/
	O port will be 300 if Card Services is not present; otherwise, the first
	available I/O port obtained from Card Services will be used.

NODE ADDRESS <nnnnnnnnnnnn>

Description: Station address used to override the default PROM value.

Default: None (driver uses PROM)

Accepted values: Valid hexadecimal for a Station Address according to Ethernet pattern.

User’sGuideandReference 4 - 3