Ositech comm 614006-001 manual Meter segments unless all LAN adapters and repeaters

Page 17

	Hardware Installation
	If you are using extended length segments, all repeaters and transceivers
	must be designed for 300-meter operation. In addition, all LAN adapters
	must be configured to operate with the extended segment length.
Note:	You cannot use Ethernet adapters to extend 185-meter segments to
	300-meter segments unless all LAN adapters and repeaters in the
	network are capable of operation on the extended segment length.

User’sGuideandReference

2 - 9

Image 17

Contents User’s Guide and Reference Trumpcard Ethernet LANCopyright How To Contact UsPreface FCC Notice Contents Appendices Section One IntroductionTrumpcard Ethernet LAN Section Two Hardware InstallationPreparing for Installation Installing the Trumpcard Ethernet LAN Connecting to 10BaseT Twisted Pair Networks Media Access Module 10BaseT Network Connection Interface Cabling and Pinout Concentrators Twisted Pair Network CharacteristicsConnecting to 10Base2 Thin Ethernet Networks Thin Coax Ethernet Segment Meter segments unless all LAN adapters and repeaters Characteristics Standard Length Extended Length Segment Thin Ethernet Network CharacteristicsLink LED Green Media Access Module LED IndicatorsActivity LED RED Section Two Section Three OperationMulti-Function Configuration Socket Services and Card ServicesBanyan Vines Network Software Installation\DOS \DOS\OTCETH.DOSDEVICE=C\DECNET\PROTMAN.SYS /IC\DECNET FTP Software LanWatchDEVICE=C\DECNET\OTCETH.DOS Call \DECNET\STARTNETIBM LAN Server Operation IBM LAN Support Program \LSP\NETBIND \LANMAN\NETBIND Microsoft LAN ManagerMicrosoft Windows for Workgroups PATH=C\NOVELL\NET.CFG OSI$OTCETH \WFW\311\WINDOWS\NETSTART DEVICE=C\WINDOWS\IFSHLP.SYSCD \NOVELL LSLNetwork Microsoft Windows NTPRIORITY=MS$NETBEUI MS$OTCETH$NIC Microsoft Workgroup Connection for DOS\DOS\NET Start BINDINGS=MS$OTCETH$NIC LANABASE=0 Ndis GenericPath Novell Netware for DOSNetware Netx \NETWARE\OS2\OTCETH.SYS Novell Netware for OS/2Novell Unixware Dlpi Driver Accompanying the PC Card for more details SCO Unix LLI Driver Init Single User Mode Section Four AppendicesMedia media type Appendix a ODI KeywordsFrame frame type MEM memory location INT interrupt levelPort I/O port Node Address nnnnnnnnnnnnSocket socket number Protocol named protocol protocol id frame typeLook Ahead Size look ahead value Frame ETHERNET802.3 Media 10BASET Exclusive Dislink INTMEM= memory location Appendix B Ndis KeywordsMEDIA= media type IOBASE= I/O port INTERRUPT= interrupt levelNETADDRESS= ‘nnnnnnnnnnnn’ SOCKET= socket numberDRIVERNAME=STACK$ BINDINGS=OSITECHNIF PROTOCOL.INI ExampleFailed to register with Multi-Function Manager Appendix C MessagesUnable to configure Trumpcard Failed to register with Card ServicesOnly supported on Pcmcia 2.x or higher Socket/Card Services Pcmcia adapter not foundMust be an AT .286 or higher system Expected Tuple not foundHardware not responding No Media Cable ConnectedODI Specific Error Messages Section Four