Section Four
PROTOCOL < named protocol > < protocol id > < frame type >
Description: Associate the named protocol with the protocol id
Default:
Accepted values: Refer to Novell documentation
SOCKET <socket number>
| Description: Enable operation with PCMCIA socket indicated |
| Default: Auto |
| Accepted values: 1, 2, or Auto |
Notes: | Specifying a socket number will limit the driver to only checking that |
| socket for the presence of a Trumpcard. |
LOOK AHEAD SIZE <look ahead value>
Description: Set the look ahead size to pass to the protocol stack
Default: 18
Accepted value: Any even value between 18 and 256 inclusive
NET.CFG Example
An example of a possible NET.CFG file is as follows:
Link Driver OTCETH
FRAME ETHERNET_802.3
MEDIA 10BASET
EXCLUSIVE
DISLINK
INT 5
MEM D000
PORT 300
NODE ADDRESS 000079821660
PROTOCOL IPX 0 ETHERNET_802.3
LOOK AHEAD SIZE 120
SOCKET 1
4 - 4 | Trumpcard Ethernet LAN |