Ositech comm 614006-001 manual Novell Netware for DOS, Path

Section Three

Change the second line above to:

DEVICE=C:\<path>\OTCETH.DOS <-- DOS

or

DEVICE=C:\<path>\OTCETH.OS2 <-- OS2

Save the changes made to this file.

7.Next, edit the PROTOCOL.INI file, the file will be in the <path> directory.

In this file under the heading [ELNK_NIF] please change the line DRIVERNAME=ELNK$ to read DRIVERNAME=OTCETH$

Also remove any existing settings under this line(i.e. INTERRUPT, IOADDRESS, DMACHANNEL, etc.)

Remove any keywords that were for the 3COM Etherlink driver. Add any required settings using the keywords described in Appendix B. Save the changes made to this file.

8.Finally, place a copy of the Trumpcard NDIS Device Driver (OTCETH.DOS from the \DOS subdirectory or OTCETH.OS2 from the \OS2 subdirectory) on the Trumpcard driver diskette to the directory on your hard disk drive that contains your Network files

<path>.

Your Network installation is now complete.

Note:	Keyword specifications associated with the NDIS driver are explained
	in Appendix B, Error Messages in Appendix C.

Novell Netware for DOS

Depending on the version of Netware, the installation of the Ositech Trumpcard ODI driver will be done automatically or must be done manually.

3 - 16 Trumpcard Ethernet LAN