Ositech comm 614006-001 Device=C\Windows\Ifshlp.Sys, Windows\Netstart, Cd \Novell, Lsl, Otceth

Page 32

Section Three

[NWLINK]

BINDINGS=OTCETH

[NETBEUI]

BINDINGS=OTCETH,XXXX

LANABASE=0

SESSIONS=10

	In your CONFIG.SYS the following line should be present:
	DEVICE=C:\WINDOWS\IFSHLP.SYS
	In your AUTOEXEC.BAT the following lines should be present:
	C:\WINDOWS\NETSTART
	CD \NOVELL
	LSL
	OTCETH
	IPXODI
	C:\WINDOWS\ODIHLP.EXE
	NETX
	Your NET.CFG file under the Novell directory would contain the
	following lines:
	LINK DRIVER OTCETH
	Frame Ethernet_802.3
	Frame Ethernet_II
	Frame Ethernet_802.2
	Frame Ethernet_SNAP
	LINK DRIVER XXXX
	Frame Ethernet_802.3
	Frame Ethernet_II
	Frame Ethernet_802.2
	Frame Ethernet_SNAP
	Link Support
	Max Boards 8
	Refer to the Installation Instructions for Novell Networks for details on
	Netware installation and setup.
Note:	If the Trumpcard is a Multi-Function adapter, additional steps may
	be required to complete the full installation. Refer to the Installation
	Guide accompanying the adapter for more details.
Note:	Keyword specifications associated with the NDIS driver are
	explained in Appendix B, Error Messages in Appendix C.

3 - 12

Trumpcard Ethernet LAN

Image 32

Contents Trumpcard Ethernet LAN User’s Guide and ReferenceHow To Contact Us CopyrightPreface FCC Notice Contents Appendices Introduction Section OneTrumpcard Ethernet LAN Section Two Hardware InstallationPreparing for Installation Installing the Trumpcard Ethernet LAN Connecting to 10BaseT Twisted Pair Networks Media Access Module 10BaseT Network Connection Interface Cabling and Pinout Twisted Pair Network Characteristics ConcentratorsConnecting to 10Base2 Thin Ethernet Networks Thin Coax Ethernet Segment Meter segments unless all LAN adapters and repeaters Thin Ethernet Network Characteristics Characteristics Standard Length Extended Length SegmentLink LED Green Media Access Module LED IndicatorsActivity LED RED Section Two Operation Section ThreeSocket Services and Card Services Multi-Function ConfigurationNetwork Software Installation Banyan Vines\DOS\OTCETH.DOS \DOSFTP Software LanWatch DEVICE=C\DECNET\PROTMAN.SYS /IC\DECNETDEVICE=C\DECNET\OTCETH.DOS Call \DECNET\STARTNETIBM LAN Server Operation IBM LAN Support Program \LSP\NETBIND \LANMAN\NETBIND Microsoft LAN ManagerMicrosoft Windows for Workgroups \WFW\311 PATH=C\NOVELL\NET.CFG OSI$OTCETHDEVICE=C\WINDOWS\IFSHLP.SYS \WINDOWS\NETSTARTCD \NOVELL LSLMicrosoft Windows NT NetworkPRIORITY=MS$NETBEUI MS$OTCETH$NIC Microsoft Workgroup Connection for DOS\DOS\NET Start Ndis Generic BINDINGS=MS$OTCETH$NIC LANABASE=0Novell Netware for DOS PathNetware Netx Novell Netware for OS/2 \NETWARE\OS2\OTCETH.SYSNovell Unixware Dlpi Driver Accompanying the PC Card for more details SCO Unix LLI Driver Init Single User Mode Appendices Section FourMedia media type Appendix a ODI KeywordsFrame frame type INT interrupt level MEM memory locationPort I/O port Node Address nnnnnnnnnnnnProtocol named protocol protocol id frame type Socket socket numberLook Ahead Size look ahead value Frame ETHERNET802.3 Media 10BASET Exclusive Dislink INTMEM= memory location Appendix B Ndis KeywordsMEDIA= media type INTERRUPT= interrupt level IOBASE= I/O portNETADDRESS= ‘nnnnnnnnnnnn’ SOCKET= socket numberPROTOCOL.INI Example DRIVERNAME=STACK$ BINDINGS=OSITECHNIFAppendix C Messages Failed to register with Multi-Function ManagerFailed to register with Card Services Unable to configure TrumpcardOnly supported on Pcmcia 2.x or higher Socket/Card Services Pcmcia adapter not foundExpected Tuple not found Must be an AT .286 or higher systemHardware not responding No Media Cable ConnectedODI Specific Error Messages Section Four