Trango Broadband M2400S user manual Appendix B Specifications, Radio Transmit Specifications

Appendix B Specifications

All specifications apply to M2400S-AP and M2400S-SU unless otherwise noted.

Radio Transmit Specifications

Storable Channels:	8 memory locations
Agility:	2405 to 2475 MHz in 1 MHz increments
Default channels-
Channel 1:	2405 MHz
Channel 2:	2415 MHz
Channel 3:	2425 MHz
Channel 4:	2435 MHz
Channel 5:	2445 MHz
Channel 6:	2455 MHz
Channel 7:	2465 MHz
Channel 8:	2475 MHz
Power Control Range:	Max: +23 dBm +/- 1
	Min: +10 dBm +/- 2 Step: 1 dB
Pout:	+23 dBm max
Ant. Gain:	13 dBi (AP), +15dbi (SU)
EIRP:	+36 dBm (4 Watt) (AP), 38.5 dbm (SU w/ internal antenna)
Freq. Stability:	+/- 2.5 ppm PLL stabilized over temperature
Freq. Plan:	Upconversion from BB to 426 MHz IF to 2400 MHz
Modulated BW:	10 MHz (null to null, 40 dB down)
2nd Harmonic atten:	Per CFR47 part 15.247
LO Supression:	Per CFR47 part 15.247
Receiver Specifications
Storable Channels:	8 memory locations
Agility:	2405 to 2475 MHz in 1 MHz increments
Default channels-
Channel 1:	2405 MHz
Channel 2:	2415 MHz
Channel 3:	2425 MHz
Channel 4:	2435 MHz
Channel 5:	2445 MHz
Channel 6:	2455 MHz
Channel 7:	2465 MHz
Channel 8:	2475 MHz
Cascade Noise Figure:	< 5 dB
Receiver Sensitivity:
5.5 MBPS Rate:	- 88 dBm typical-1600 byte packet
(1x10-6BER)	- 88 dBm typical-64 byte packet
2.25 MBPS Rate:	- 91 dBm typical-1600 byte packet
(1x10-6BER)	- 91 dBm typical-64 byte packet
Image Rejection:	> 90 dB
Frequency Plan:	Down conversion from 2400 MHz to 426 MHz IF to BB
Trango Broadband Wireless — User Manual M2400S Rev. A		Page 44