1.3 Handling Precautions
To operate this device properly, please observe the following precautions.
1.3.1Main Unit
●Cooling fans are attached to the rear panel of the Autoloader. Do not use the unit in places where the fans will be obstructed or there is poor air circulation. The Autoloader should not be stored or used in extremely hot locations or in locations having severe temperature changes.
●The Autoloader is built with precision electronic components. Do not subject the Autoloader to shock or either use or store it in locations that are exposed to vibration.
●Do not use or store the Autoloader in locations where chemical vapors are dispersed in the air or where the unit will come into contact with chemicals.
●Do not move or transport the Autoloader while the power is ON.
●
●
Do not use or store the Autoloader with a heavy object on top of it.
Do not switch off the power while the Autoloader is operating.
●To insert or remove a magazine, first check that the Autoloader is in a condition that will allow insertion or removal of the magazine.
●Only insert a cartridge into a magazine, nothing else.
●Be sure to use the (rack mount) Tandberg LTO2 Autoloader mounted in a rack . (Rack mounting requires the Tandberg LTO2 Autoloader Rack Mounting Kit.)
1.3.2Cartridges
●The data cartridge that should be used is the TD LTO1 Data Cartridge (TD P/N:
432744).
●The cleaning cartridge that should be used is the TD LTO Universal Cleaning Cartridge (TD P/N:
432631)
●See Chapter 4 for other precautions.
1.4Transfer or Disposal of the Device
●When disposing of this device along with the consumables and accessories, please follow the national and municipal guidelines for disposal.
●When transferring this device to another party, please include all items including this manual.
-6 -