Tandberg Data Tandberg LTO2 manual shows the upper Roller after cleaning

Operation 8

Operation 9

Wipe off remaining water on the Roller by dry swab.

If you have finished cleaning of the upper Roller, press the arrow key ( → ) and define the command. Then the Roller moves further backwards a little as shown in figure 5-10.

Display (line 1): CLEAN ROLL

Display (line 2): Step 3 >>

Figure 5-10

CAUTION

Do not insert your hands during displaying Caution message as fingers may be pinched in the Roller.

Tip

If you press the arrow key (←) in this position of the Roller, the Roller moves to previous position as shown in figure 5-9.

Operation 10	Then clean the remaining surface of Roller as shown in figure 5-11.
	(Figure 5-12 shows the upper Roller after cleaning.)

Figure 5-11 Figure 5-12

- 49 -