5.1.2.5.4 Setting Cleaning mode
Operation 1 Ensure your Autoloader is in maintenance mode.
Display (line 1): READY
Display (line 2): F/W Rev.?
Operation 2 Press the arrow key and select "CLEAN ROL?" command.
Display (line 1): READY
Display (line 2): CLEAN ROL?
Operation 3 Press the ENTER key and define the command.
Display (line 1): CLEAN ROLL
Display (line 2): Eject Magz
Operation 4 Remove the magazine carefully.
Display (line 1): CLEAN ROLL
Display (line 2): Step 1 >>
5.1.2.5.5 Cleaning the Roller
Operation 1 |
| Press the arrow key (→) and define the command. |
| ||
|
| Then, the Roller of the internal transporter moves the position of the |
|
| front side of the transporter as shown in figure |
|
| Roller, LCD displays the next messages. |
|
| Display (line 1): CLEAN ROLL |
|
| Display (line 2): Caution |
CAUTION
Do not insert your hands during displaying Caution message as fingers may be pinched in the Roller.
Figure
(The Roller is contaminated intentionally for the explanation.)
- 46 -