4.4 Handling Precautions
This section describes precautions to take when handling the data cartridge.
4.4.1 Usage Precautions
□Before use
-Open the cartridge door and check that the reader pin is locked.
-Do not use a data cartridge that is damaged, misshapen, or bent.
-When using a data cartridge that has been stored under conditions other than the operation temperature and humidity conditions of the Autoloader, bring the cartridge into the environment in which it will be used for a period at least as long as the time that it was exposed to under conditions outside the operation temperature and humidity conditions (i.e.24 hours maximum) and then use. When the temperature difference is great between the storage and operation locations at this time, do not move the cartridge at once, rather, take care so that the temperature change is in the order of 10°C per hour and allow the data cartridge to adapt to the temperature of the operation location.
□When loading to magazine and fixed slots
-Please insert the data cartridge securely. (See Chapter 3 for details.) Firmly close the protective case from which the data cartridge was removed and store it in a clean place
□After use
-Be sure to return the used cartridge to the protective case and store it in a
□Disposal Method
-When disposing the cartridge, please follow the national and municipal guidelines for disposal.
4.4.2 General Precautions
□Do not touch the tape medium (i.e. the magnetic surface).
□Do not bring the cartridge close to objects that produce a magnetic field.
□Do not place the cartridge where it will be exposed to direct sunlight or near heaters.
□Do not subject the cartridge to strong shocks.
□Avoid handling the cartridge while eating and drinking or smoking. Also be careful not to allow the cartridge to come into contact with thinners, alcohol, beverages
□Be sure to return the cartridge to the case after use.
□Insert the cartridge into the magazine carefully.
□The data cartridge is sensitive to dirt and dust.
-35 -