Panasonic KX-FPG376, KX-FPG377 manual Paper tray, Recording paper, To use A4 size paper

Page 16

1. Introduction and Installation

1.7 Paper tray

Insert the tabs on the paper tray (1) into the slots on the back of the unit (2).

1

2

To use A4 size paper

Insert the tab on the A4 paper guide (1) into the slot on the paper tray (2) and push the guide until it clicks into place. Attach the paper tray to the back of the unit.

1

2

Note:

LChange the recording paper size to “A4” (feature #16 on page 61).

1.8 Recording paper

The unit can hold:

–Up to 30 sheets of 60 g/m2 to 80 g/m2 (16 lb. to 21 lb.) paper.

–Up to 20 sheets of 90 g/m2 (24 lb.) paper.

–No more than 20 sheets of legal paper.

Please read the note on page 84 for important information on recording paper.

For superior results, we recommend Hammermill® Jet Print paper.

1Before inserting a stack of paper, fan the paper to prevent paper jams.

2Pull the tension plate forward (1) and insert the paper, print-side down (2), then push the tension plate back.

2

1

LIf the paper is not inserted correctly, readjust the paper, or the paper may jam.

Correct		Incorrect

14	For Fax Advantage assistance, call 1-800-435-7329.

Image 16

Contents KX-FPG376 KX-FPG377 This model is designed to be used only in the U.S.AHow to use the operating instructions OpenLocation of controls Base unitHandset Buttons Listed in alphabetical orderThings you should keep a record Important safety instructions Never install telephone wiring during a lightning stormBattery For best performance Battery chargeOperating distance and noise Directory Direct commands for programming When a function does not work, check10.1 OpenLCR service for the Caller IQ Listening to recorded mailboxIncluded accessories Part number*1 Quantity SpecificationsPower cord Quick start sheetOverview Accessory informationTelephone Description of base unit buttons Description of handset buttons Installing the ink film Ink filmTurn Tight Replacing the ink filmInk film is not wrapped around the blue core Recording paper Paper trayTo use A4 size paper Battery replacement CorrectIncorrectBelt clip Headset optionalTo attach the belt clip To remove the belt clip To connect an optional headset to the handsetConnections Using surge protectorsLineprotectorsurge Battery charge Stop Menu Selecting the way to use your fax machinePress SET How to setup How to receive calls Case 1 TAM/FAX Telephone Answering Machine/FaxYour situation SETHow to setup SETFAX/START AB Menu Case 3 TEL onlySET Digital SP-PHONE Preparation How to receive faxes Case 4 FAX onlyAdjusting handset volume Ringer volumeHandset receiver volume Speaker volumeFax voice guidance volume Adjusting base unit volumeAnswering machine volume Date and time Your logo FlashYour fax number Using the handset Making phone callsFunction Talk SP-PHONE HoldclearAnswering phone calls Using the base unitAB REDIAL/PAUSE Digital SP-PHONE Paging the base unit from the handset IntercomPaging the handset from the base unit Transferring a call From the handset to the base unitFrom the base unit to the handset LOCATOR/INTERCOM to page the handsetYou can also send faxes using the navigator directory Space # $ To change capital or lower-case LetterDelete button Enter the correct character/numberMaking a phone call using the navigator directory Editing a stored itemErasing a stored item Another method to erase a stored itemCaller ID service How Caller ID is displayedPress v or e. Example Viewing and calling back using caller informationTo edit a telephone number Caller ID Using the base unitFAX/START Digital SP-PHONE Erasing caller information Storing caller information into the navigator directoryErasing all caller information Into the handsetSending a fax manually Stop Help AB REDIAL/PAUSE FAX/START Digital SP-PHONE SETDocuments you can send Sending a fax using the navigator directory Broadcast transmissionProgramming items into the broadcast memory Adding a new item into the broadcast memoryTo cancel broadcast transmission Erasing a stored item from the broadcast memorySending the same document to pre-programmed parties To send the same document to a one-time group of itemsActivating TEL mode Receiving a fax manually-AUTO Answer OFFOff Stop FAX/START Digital SP-PHONEActivating TAM/FAX mode Telephone Answering Machine/Fax mode Receiving a fax automatically-AUTO Answer onActivating FAX only mode How to receive callsChanging the ring setting in TAM/FAX mode How to receive faxesDistinctive Ring service from your phone company Using two or more phone numbers on a single telephone lineActivating the Distinctive Ring feature Ring pattern SettingsProgramming the ring pattern assigned for fax Making a copy More copying featuresStart SET Setting Recording Original Paper size Document Size 100% Default92% 86%Recording your greeting message Leaving a message for others or yourselfErasing your recorded greeting message Erase Record StopListening to recorded messages Erasing recorded messagesFlash/Light Erase Stop SlowListening to recorded messages Remote operation with the handsetPlayback Remote operations using the remote commands Buttons Remote commandsOperating from a remote location Summary of remote operationOther remote operations When a caller calls Allowing callers to leave private messages mailboxRecording your mailbox greeting messages To use a mailboxListening to recorded mailbox messages using the base unit Listening to recorded mailbox messages using the handsetTo record a memo message into a mailbox To erase all messages in a mailboxHow this feature works Transferring recorded messages to another telephoneRecording your transfer greeting message To listen to messages in another memory after playbackUnit will repeat your message Press Menu To check the transfer greeting messageTo erase your transfer greeting message Pager callBasic features Programming basic featuresProgramming advanced features ProgrammingAdvanced features Code #26 Setting the Caller ID list to print automatically Code #31 Activating the Distinctive Ring featureCode #34 Setting the quick scan Code #36 Receiving oversized documentsCode #42 Setting the message alert Code #43 Setting the recording time alertCode #44 Setting the memory reception alert Code #46 Setting friendly receptionDirect commands for programming features Program code and direct command button#13 Dialing mode #23 Overseas mode#25 Delayed transmission #01 Date and time#51 Mailbox 1 password #52 Mailbox 2 password#76 Connecting tone #80 Reset advanced featuresError messages Reports Error messages DisplayOut the document Remaining film is low. Prepare a new filmGenerate an intense magnetic field Recording paper jam occurred. Clear the jammed paperInitial settings When a function does not work, check hereGeneral Cordless handset Fax sending Fax receivingCopying If a power failure occurs Answering machineCannot listen to messages from a remote location Messages in the mailbox do not play backRecording paper jams When the recording paper has jammed in the unitOpen the back cover When the recording paper was not fed into the unit properly StartDocument jams sending Document feeder cleaning Do not use paper products, such as paper towels or tissuesThermal head cleaning OpenLCR service for the Caller IQ feature To turn the Caller IQ on / OFFOpenlcr Caller IQ OFFUpdating the rate table downloading the rate table Downloading informationPrinting information Base unit Viewing information HandsetPress Press SET to start printing Press For assistance, please call openLCR 1-866-openLCRReference lists and reports Base unit only Technical data about this product Paper specifications FrequencyFCC and Other Information FCC RF Exposure Warning Limited Warranty FAX categories Parts LaborThermal Transfer Facsimile Laser FacsimileFor In Limited Warranty product service Customer Services directory Index #77 Auto AnswerIndex No Extra Cost Panasonic FAX Advantage Program