Panasonic KX-FPG376, KX-FPG377 manual Direct commands for programming features

Page 66

8. Programmable Features

To transfer a recorded incoming message to another telephone (page 58), activate this feature and program the transfer telephone number.

1.Press {MENU}.

2.Press {#}, then {6}{0}.

3.Press {A} or {B} repeatedly to select “ON”.

4.Press {SET}.

5.Enter the transfer telephone number.

6.Press {SET}.

7.Press {MENU}.

Code #61: Checking, recording or erasing the transfer greeting message

TRNS-GREETING

CHECK [±]

See page 58 for details.

Code #67: Setting the incoming message monitor

ICM MONITOR

MODE=ON [±]

To hear an incoming message (ICM) from the speaker when the answering machine is recording the message.

“ON” (default): You can monitor the incoming message.

“OFF”: Deactivates this feature.

Code #70: Calling your pager

PAGER CALL

MODE=OFF [±]

See page 59 for details.

Code #76: Setting the connecting tone

CONNECTING TONE

MODE=ON [±]

If you often have trouble when sending faxes, this feature allows you to hear connecting tones; fax tone, ring back tone and busy tone. You can use those tones to confirm the status of the other party’s machine.

LIf the ring back tone continues, the other party’s machine may not be a facsimile or may have run out of paper. Check with the

other party.

LThe connecting tone volume cannot be adjusted.

“ON” (default): You will hear connecting tones.

“OFF”: Deactivates this feature.

Code #77: Changing the receiving mode in the AUTO ANSWER setting

AUTO ANSWER

MODE=TAM/FAX [±]

“TAM/FAX” (default): Telephone Answering Machine/Fax mode (page 45)

“FAX ONLY”: Fax only mode (page 46)

Code #80: Resetting advanced features to their default settings

SET DEFAULT

RESET=NO [±]

To reset the advanced features:

1.Press {MENU}.

2.Press {#}, then {8}{0}.

3.Press {A} or {B} repeatedly to select “YES”.

4.Press {SET}.

5.Press {SET} again.

6.Press {MENU}.

8.4Direct commands for programming features

You can also select the desired setting by directly entering the program code (# and a 2-digit number) and direct command.

For more details on the features, see page 60 to page 64.

1Press {MENU}.

2Press {#} and the 2-digit code number.

3Press the desired direct command, using the dial keypad, to display the desired setting. L This step may be slightly different

depending on the feature.

4Press {SET}.

5To exit programming, press {MENU}.

8.4.1Program code and direct command button

{#}{0}{0} Quick Setup

–{1}: “TAM/FAX” (default)

–{2}: “DIST. RING”

–{3}: “TEL ONLY”

–{4}: “FAX ONLY”

LPress {SET} 2 times before pressing the direct command button.

64

Page 65 Page 67
Image 66
Page 65 Page 67
Contents KX-FPG376 KX-FPG377 This model is designed to be used only in the U.S.AHow to use the operating instructions OpenHandset Location of controlsBase unit Buttons Listed in alphabetical orderThings you should keep a record Important safety instructions Never install telephone wiring during a lightning stormBattery Battery charge For best performanceOperating distance and noise Directory 10.1 OpenLCR service for the Caller IQ Direct commands for programmingWhen a function does not work, check Listening to recorded mailboxPower cord Included accessoriesPart number*1 Quantity Specifications Quick start sheetAccessory information OverviewTelephone Description of base unit buttons Description of handset buttons Installing the ink film Ink filmReplacing the ink film Turn TightInk film is not wrapped around the blue core Paper tray Recording paperTo use A4 size paper Battery replacement CorrectIncorrectTo attach the belt clip To remove the belt clip Belt clipHeadset optional To connect an optional headset to the handsetUsing surge protectors ConnectionsLineprotectorsurge Battery charge Selecting the way to use your fax machine Stop MenuPress SET Your situation How to setup How to receive callsCase 1 TAM/FAX Telephone Answering Machine/Fax SETHow to setup SETCase 3 TEL only FAX/START AB MenuSET Digital SP-PHONE Preparation How to receive faxes Case 4 FAX onlyHandset receiver volume Adjusting handset volumeRinger volume Speaker volumeAdjusting base unit volume Fax voice guidance volumeAnswering machine volume Date and time Your logo FlashYour fax number Function Talk Using the handsetMaking phone calls SP-PHONE HoldclearUsing the base unit Answering phone callsAB REDIAL/PAUSE Digital SP-PHONE Intercom Paging the base unit from the handsetPaging the handset from the base unit From the base unit to the handset Transferring a callFrom the handset to the base unit LOCATOR/INTERCOM to page the handsetDelete button You can also send faxes using the navigator directorySpace # $ To change capital or lower-case Letter Enter the correct character/numberErasing a stored item Making a phone call using the navigator directoryEditing a stored item Another method to erase a stored itemCaller ID service How Caller ID is displayedViewing and calling back using caller information Press v or e. ExampleTo edit a telephone number Using the base unit Caller IDFAX/START Digital SP-PHONE Erasing all caller information Erasing caller informationStoring caller information into the navigator directory Into the handsetSending a fax manually Stop Help AB REDIAL/PAUSE FAX/START Digital SP-PHONE SETDocuments you can send Programming items into the broadcast memory Sending a fax using the navigator directoryBroadcast transmission Adding a new item into the broadcast memorySending the same document to pre-programmed parties To cancel broadcast transmissionErasing a stored item from the broadcast memory To send the same document to a one-time group of itemsOff Activating TEL modeReceiving a fax manually-AUTO Answer OFF Stop FAX/START Digital SP-PHONEActivating TAM/FAX mode Telephone Answering Machine/Fax mode Receiving a fax automatically-AUTO Answer onChanging the ring setting in TAM/FAX mode Activating FAX only modeHow to receive calls How to receive faxesActivating the Distinctive Ring feature Distinctive Ring service from your phone companyUsing two or more phone numbers on a single telephone line Ring pattern SettingsProgramming the ring pattern assigned for fax More copying features Making a copyStart SET 92% Setting Recording Original Paper size Document Size 100%Default 86%Erasing your recorded greeting message Recording your greeting messageLeaving a message for others or yourself Erase Record StopFlash/Light Listening to recorded messagesErasing recorded messages Erase Stop SlowRemote operation with the handset Listening to recorded messagesPlayback Operating from a remote location Remote operations using the remote commandsButtons Remote commands Summary of remote operationOther remote operations Recording your mailbox greeting messages When a caller callsAllowing callers to leave private messages mailbox To use a mailboxTo record a memo message into a mailbox Listening to recorded mailbox messages using the base unitListening to recorded mailbox messages using the handset To erase all messages in a mailboxRecording your transfer greeting message How this feature worksTransferring recorded messages to another telephone To listen to messages in another memory after playbackTo erase your transfer greeting message Unit will repeat your message Press MenuTo check the transfer greeting message Pager callProgramming advanced features Basic featuresProgramming basic features ProgrammingAdvanced features Code #34 Setting the quick scan Code #26 Setting the Caller ID list to print automaticallyCode #31 Activating the Distinctive Ring feature Code #36 Receiving oversized documentsCode #44 Setting the memory reception alert Code #42 Setting the message alertCode #43 Setting the recording time alert Code #46 Setting friendly receptionDirect commands for programming features Program code and direct command button#25 Delayed transmission #13 Dialing mode#23 Overseas mode #01 Date and time#76 Connecting tone #51 Mailbox 1 password#52 Mailbox 2 password #80 Reset advanced featuresError messages Reports Error messages DisplayGenerate an intense magnetic field Out the documentRemaining film is low. Prepare a new film Recording paper jam occurred. Clear the jammed paperWhen a function does not work, check here Initial settingsGeneral Cordless handset Fax sending Fax receivingCopying Cannot listen to messages from a remote location If a power failure occursAnswering machine Messages in the mailbox do not play backWhen the recording paper has jammed in the unit Recording paper jamsOpen the back cover When the recording paper was not fed into the unit properly StartDocument jams sending Document feeder cleaning Do not use paper products, such as paper towels or tissuesThermal head cleaning Openlcr OpenLCR service for the Caller IQ featureTo turn the Caller IQ on / OFF Caller IQ OFFUpdating the rate table downloading the rate table Downloading informationPress Press SET to start printing Printing information Base unitViewing information Handset Press For assistance, please call openLCR 1-866-openLCRReference lists and reports Base unit only Technical data about this product Paper specifications FrequencyFCC and Other Information FCC RF Exposure Warning Thermal Transfer Facsimile Limited WarrantyFAX categories Parts Labor Laser FacsimileFor In Limited Warranty product service Customer Services directory Index #77 Auto AnswerIndex No Extra Cost Panasonic FAX Advantage Program
Top Page Image Contents