Panasonic KX-FPG376, KX-FPG377 manual Thermal head cleaning

Page 80

9. Help

9.7 Thermal head cleaning

If smudges or black/white lines appear on a copied/received document, check for dust on the thermal head. Clean the thermal head to remove the dust.

1Disconnect the power cord and the telephone line cord.

2Open the front cover (1) by pulling up the center part (2).

3Release the back cover by pushing the green button (1) on the right side of the unit.

Release the back cover by pushing in the green lever (2) in the unit.

4Open the back cover (1). Remove the ink film (2).

5Clean the thermal head (1) with a cloth moistened with isopropyl rubbing alcohol, and let it dry thoroughly.

Caution:

L To prevent a malfunction due to static electricity, do not use a dry cloth and do not touch the thermal head directly.

6Reinstall the ink film and close the covers (see steps 4 to 6 on page 12).

7Connect the power cord and the telephone line cord.

78	For Fax Advantage assistance, call 1-800-435-7329.

Image 80

Contents KX-FPG376 KX-FPG377 This model is designed to be used only in the U.S.AHow to use the operating instructions OpenLocation of controls Base unitHandset Buttons Listed in alphabetical orderThings you should keep a record Important safety instructions Never install telephone wiring during a lightning stormBattery Operating distance and noise Battery chargeFor best performance Directory Direct commands for programming When a function does not work, check10.1 OpenLCR service for the Caller IQ Listening to recorded mailboxIncluded accessories Part number*1 Quantity SpecificationsPower cord Quick start sheetTelephone Accessory informationOverview Description of base unit buttons Description of handset buttons Installing the ink film Ink filmInk film is not wrapped around the blue core Replacing the ink filmTurn Tight To use A4 size paper Paper trayRecording paper Battery replacement CorrectIncorrectBelt clip Headset optionalTo attach the belt clip To remove the belt clip To connect an optional headset to the handsetLineprotectorsurge Using surge protectorsConnections Battery charge Press SET Selecting the way to use your fax machineStop Menu How to setup How to receive calls Case 1 TAM/FAX Telephone Answering Machine/FaxYour situation SETHow to setup SETSET Digital SP-PHONE Case 3 TEL onlyFAX/START AB Menu Preparation How to receive faxes Case 4 FAX onlyAdjusting handset volume Ringer volumeHandset receiver volume Speaker volumeAnswering machine volume Adjusting base unit volumeFax voice guidance volume Date and time Your logo FlashYour fax number Using the handset Making phone callsFunction Talk SP-PHONE HoldclearAB REDIAL/PAUSE Digital SP-PHONE Using the base unitAnswering phone calls Paging the handset from the base unit IntercomPaging the base unit from the handset Transferring a call From the handset to the base unitFrom the base unit to the handset LOCATOR/INTERCOM to page the handsetYou can also send faxes using the navigator directory Space # $ To change capital or lower-case LetterDelete button Enter the correct character/numberMaking a phone call using the navigator directory Editing a stored itemErasing a stored item Another method to erase a stored itemCaller ID service How Caller ID is displayedTo edit a telephone number Viewing and calling back using caller informationPress v or e. Example FAX/START Digital SP-PHONE Using the base unitCaller ID Erasing caller information Storing caller information into the navigator directoryErasing all caller information Into the handsetSending a fax manually Stop Help AB REDIAL/PAUSE FAX/START Digital SP-PHONE SETDocuments you can send Sending a fax using the navigator directory Broadcast transmissionProgramming items into the broadcast memory Adding a new item into the broadcast memoryTo cancel broadcast transmission Erasing a stored item from the broadcast memorySending the same document to pre-programmed parties To send the same document to a one-time group of itemsActivating TEL mode Receiving a fax manually-AUTO Answer OFFOff Stop FAX/START Digital SP-PHONEActivating TAM/FAX mode Telephone Answering Machine/Fax mode Receiving a fax automatically-AUTO Answer onActivating FAX only mode How to receive callsChanging the ring setting in TAM/FAX mode How to receive faxesDistinctive Ring service from your phone company Using two or more phone numbers on a single telephone lineActivating the Distinctive Ring feature Ring pattern SettingsProgramming the ring pattern assigned for fax Start SET More copying featuresMaking a copy Setting Recording Original Paper size Document Size 100% Default92% 86%Recording your greeting message Leaving a message for others or yourselfErasing your recorded greeting message Erase Record StopListening to recorded messages Erasing recorded messagesFlash/Light Erase Stop SlowPlayback Remote operation with the handsetListening to recorded messages Remote operations using the remote commands Buttons Remote commandsOperating from a remote location Summary of remote operationOther remote operations When a caller calls Allowing callers to leave private messages mailboxRecording your mailbox greeting messages To use a mailboxListening to recorded mailbox messages using the base unit Listening to recorded mailbox messages using the handsetTo record a memo message into a mailbox To erase all messages in a mailboxHow this feature works Transferring recorded messages to another telephoneRecording your transfer greeting message To listen to messages in another memory after playbackUnit will repeat your message Press Menu To check the transfer greeting messageTo erase your transfer greeting message Pager callBasic features Programming basic featuresProgramming advanced features ProgrammingAdvanced features Code #26 Setting the Caller ID list to print automatically Code #31 Activating the Distinctive Ring featureCode #34 Setting the quick scan Code #36 Receiving oversized documentsCode #42 Setting the message alert Code #43 Setting the recording time alertCode #44 Setting the memory reception alert Code #46 Setting friendly receptionDirect commands for programming features Program code and direct command button#13 Dialing mode #23 Overseas mode#25 Delayed transmission #01 Date and time#51 Mailbox 1 password #52 Mailbox 2 password#76 Connecting tone #80 Reset advanced featuresError messages Reports Error messages DisplayOut the document Remaining film is low. Prepare a new filmGenerate an intense magnetic field Recording paper jam occurred. Clear the jammed paperGeneral When a function does not work, check hereInitial settings Cordless handset Fax sending Fax receivingCopying If a power failure occurs Answering machineCannot listen to messages from a remote location Messages in the mailbox do not play backOpen the back cover When the recording paper has jammed in the unitRecording paper jams When the recording paper was not fed into the unit properly StartDocument jams sending Document feeder cleaning Do not use paper products, such as paper towels or tissuesThermal head cleaning OpenLCR service for the Caller IQ feature To turn the Caller IQ on / OFFOpenlcr Caller IQ OFFUpdating the rate table downloading the rate table Downloading informationPrinting information Base unit Viewing information HandsetPress Press SET to start printing Press For assistance, please call openLCR 1-866-openLCRReference lists and reports Base unit only Technical data about this product Paper specifications FrequencyFCC and Other Information FCC RF Exposure Warning Limited Warranty FAX categories Parts LaborThermal Transfer Facsimile Laser FacsimileFor In Limited Warranty product service Customer Services directory Index #77 Auto AnswerIndex No Extra Cost Panasonic FAX Advantage Program