Panasonic WJ-NT314 manual Transmit Images onto an FTP Server

Page 12

Transmit Images onto an FTP Server

Images can be transmitted to an FTP server. By configuring the following settings, transmission of images captured at an alarm occurrence or captured at a designated interval to an FTP server will become available.

Important:

When using this function, set the user name and the password to access the FTP server to restrict users who can log into the FTP server.

Transmit an alarm image at an alarm occurrence (Alarm image FTP transmission)

An alarm image can be transmitted at an alarm occurrence to the FTP server. To transmit alarm images to an FTP server, it is necessary to configure the settings in advance.

The settings for the FTP server can be configured on the [FTP] tab of the "Server setup" page. (page 49) The alarm image FTP transmission function can be turned on/off on the [Alarm] tab of the "Alarm setup" page. (page 42)

Note:

Depending on the network traffic, number of the transmitted images may not reach the set number of images to be transmitted.

Transmit images at a designated interval or period (FTP periodic transmission)

Images can be transmitted at a designated interval or period. To transmit images at a designate interval or period, it is necessary to configure the settings in advance.

The settings for the FTP server to which images are to be transmitted can be configured on the [FTP] tab of the "Server setup" page. (page 49)

On the [FTP] tab of the "Network setup" page, the FTP periodic transmission function can be turned on/off, and the settings relating to schedules (periods) can be configured. (page 55)

Notes:

Depending on the network line speed or the network traffic, images may not be transmitted at the exact designat- ed interval or period.

When "ON" is selected for both of the alarm image FTP transmission function and the FTP periodic transmission function, the alarm image FTP transmission function will be given priority over the FTP periodic transmission function. For this reason, images may not be transmitted at the exact designated interval or period if alarms occur frequently.

12

Image 12
Contents Network Operating Instructions Contents Preface About these operating instructionsTrademarks and registered trademarks Viewer SoftwareMonitor Images on a PC Monitor images from a single cameraStep Refresh interval JpegAbout the Live 0AUTO Mode *2 3Preset *2W button *2 Zoom buttons *2Alarm occurrence indication button *2 4Frame5Track 6Unit titleMonitor images from multiple cameras Action at an Alarm Occurrence Alarm typeAction at an Alarm Occurrence About the image recognition function Intruder detectionDetection of abandoned or removed objects About Avmd Advanced Video Motion DetectionAbout Live page when Avmd is activated TrackTransmit Images onto an FTP Server Save images on the SD memory card Obtain images on the SD memory cardDirectory structure of sddata Access restrictions by changing the Http port About the Network Security of This UnitEquipped security functions How to display the setup menu How to operate the setup menu About the operation window Server setup button Network setup buttonMaintenance button 3SetupConfigure the basic settings of the unit Basic setup Configure the basic settings BasicAlarm status update mode Default setting Real timeAlarm status port Available value 1 Default settingConfigure the settings relating to the NTP server NTP SD memory card setup Information about SD memory cardImage capture size VGA Size of SD Image quality Memory card Super fine FineDefault setting None Stop bit Default setting 1 bit Communication speedDefault setting 8 bit Image capture size QvgaTotal bit rate CH selectionJpeg setup Calculation of refresh interval Jpeg About the individual setup menu Refresh interval of Jpeg monitoring clientsRefresh interval of Jpeg receiving devices ReturnConfigure the settings relating to camera Camera About the operation panelZoom buttons, Focus buttons, Control pad/buttons Configure the settings relating to audio Audio Authentication Audio output port PC to UnitCable compensation Configures the multi-screen settings Multi-screen setup Available value -, 1 Default setting Camera titleDefault setting blank IP address Configure the Avmd settings Video analytics setup Set the detection program AvmdNumber of characters that can be entered 1 20 characters Available value blank, 1 StepStep Set the detection depth Set the depth automaticallySet the depth manually How to configure the schedule settings Set the Avmd schedule ScheduleAvailable value 0000 Step How to delete the set schedule Configure the alarm settings Alarm setup Configure the settings relating to the alarm action AlarmAlarm setup Auto mode OFF Default setting Terminal alarm 1 toDefault setting OFF Video loss CH1 to Command alarmAlarm image setup Alarm output terminal setup AUX nameMail notification setup Panasonic alarm protocol setup Panasonic alarm protocolUser authentication Default setting OFF User nameDefault setting blank Password Retype password Access levelHost authentication Default setting OFF Access levelConfigure the settings of the servers Server setup Configure the settings relating to the mail server MailConfigure the settings relating to the FTP server FTP FTP modeDefault setting Passive FTP server address Default setting blank Control portConfiguring the network settings Network setup Configure the network settings NetworkNetwork setup Default setting OFF IP addressDefault gateway Default setting Manual Primary DNS, Secondary DNSDefault setting blank Line speed Default setting Auto FTP accessWAN Configure the settings relating to Ddns Ddns Access intervalDefault setting OFF Host name Default setting blank User nameConfigure the settings relating to Snmp Snmp Default setting blank Unit locationCommunity name Default setting OFF Directory Default setting blank IntervalFTP periodic transmission FTP periodic transmissionUncheck the check box of the desired day of the week Maintenance of the unit Maintenance Error messageCheck the system log System log Time & dateUpgrade the firmware Upgrade How to upgrade the firmwareInitialize/restart the unit Initialization Error indications relating to Smtp Error indications relating to FTPCategory Content Description About the Displayed System LogError indications relating to Ddns Error indications relating to NTPTroubleshooting Cause/solutionSymptom Symptom Symptom Symptom Operating Instructions Cause/solution Reference Pages Solutions Images are not displayed or refreshed smoothly Panasonic Canada Inc