Symptom
No image is displayed (or too dark).
Images are displayed washed out.
Cannot adjust the focus cor- rectly.
Flicker appears on the screen.
Cause/solution
•Is the brightness setting set at an appropriate level? Click the [RESET] button of "BRIGHTNESS".
•Is the brightness setting set at an appropriate level? Click the [RESET] button of "BRIGHTNESS".
•Is there dust or dirt on the transparent part (over the lens) of the dome cover (camera shell)?
Clean the transparent part of the dome cover.
•Are objects hard to focus on with the auto focus func- tion?
Adjust the focus manually.
•When flickers appear frequently, set the shutter speed to "AUTO" or "1/100".
•Is "ON" selected for "Super Dynamic 3" ? Set to "OFF".
Reference
pages
6
6
Operating
Instructions of
camera
6
Page 30 and
Operating
Instructions of
camera
Page 30 and
Operating
Instructions of
camera
Images cannot be saved on the SD memory card.
•Is the SD memory card inserted correctly?
•Is the SD memory card formatted?
•When the power is shut down while saving images on the SD memory card because of power failure, etc., it may become impossible to write data on the SD memory card. In such a case, format the SD memory card after obtaining the images saved on the card.
Operating
Instructions
24
• Isn’t the write protect switch set to "LOCK"?
When the write protect switch is set to "LOCK", avail-
protocol.
able size/total size indication of the SD memory card will be "**********KB/**********KB".
–
•Isn’t the SD memory card out of order?
There are limited times to overwrite on an SD memory
card. When frequently overwritten, it may be at the | – |
end of product life. It is recommended to replace the |
|
SD memory card. |
|
65