Panasonic WJ-NT314 manual Solutions

Page 69

Depending on the OS installed on the PC, the following may occur.

Follow the instructions below when the following occurred. By performing the following solutions, other applications and the security level may not be affected.

The "Information Bar" expressed in the following symptom and solutions will be displayed just below the address bar only when there is information to communicate.

Symptom

The following message is displayed on the information bar.

"Pop-up blocked. To see this pop-up or additional options, click here…"

The following message is displayed on the information bar. "This site might require the following Active X control: 'nwcv3setup.exe' from 'Matsushita Electric Industrial Co., Ltd'. Click here to install..."

An unnecessary status bar or scroll bar is displayed on the pop-up window.

Solutions

Click the information bar and select "Always Allow Pop-ups from This Site…". The dialog window saying "Allow pop-ups from this site?" will be displayed. Click the [Yes] button.

Click the information bar and select "Install Active X Control".

The "Security Warning" window will be displayed. Click the "Install" button on the displayed "Security Warning" window.

Click "Internet Options" on the Tools menu of Internet Explorer, and then click the [Security] tab. Then, click the [Custom Level…] button to open the "Security Setting" window. Under "Miscellaneous", select "Enable" for "Allow script-initiated windows without size or position constraints". Click the [OK] button. The "Warning" window will be displayed. Click the [Yes] button.

Reference

pages

69

Image 69
Contents Network Operating Instructions Contents About these operating instructions PrefaceTrademarks and registered trademarks Viewer SoftwareMonitor images from a single camera Monitor Images on a PCStep Refresh interval JpegAbout the Live 3Preset *2 0AUTO Mode *2W button *2 Zoom buttons *24Frame Alarm occurrence indication button *25Track 6Unit titleMonitor images from multiple cameras Action at an Alarm Occurrence Alarm typeAction at an Alarm Occurrence Intruder detection About the image recognition functionDetection of abandoned or removed objects About Avmd Advanced Video Motion DetectionTrack About Live page when Avmd is activatedTransmit Images onto an FTP Server Obtain images on the SD memory card Save images on the SD memory cardDirectory structure of sddata Access restrictions by changing the Http port About the Network Security of This UnitEquipped security functions How to display the setup menu How to operate the setup menu About the operation window Network setup button Server setup buttonMaintenance button 3SetupConfigure the basic settings Basic Configure the basic settings of the unit Basic setupDefault setting Real time Alarm status update modeAlarm status port Available value 1 Default settingConfigure the settings relating to the NTP server NTP Information about SD memory card SD memory card setupSize of SD Image quality Memory card Super fine Fine Image capture size VGADefault setting 1 bit Communication speed Default setting None Stop bitDefault setting 8 bit Image capture size QvgaCH selection Total bit rateJpeg setup Calculation of refresh interval Jpeg Refresh interval of Jpeg monitoring clients About the individual setup menuRefresh interval of Jpeg receiving devices ReturnConfigure the settings relating to camera Camera About the operation panelZoom buttons, Focus buttons, Control pad/buttons Configure the settings relating to audio Audio Authentication Audio output port PC to UnitCable compensation Configures the multi-screen settings Multi-screen setup Available value -, 1 Default setting Camera titleDefault setting blank IP address Set the detection program Avmd Configure the Avmd settings Video analytics setupNumber of characters that can be entered 1 20 characters Available value blank, 1 StepStep Set the depth automatically Set the detection depthSet the depth manually How to configure the schedule settings Set the Avmd schedule ScheduleAvailable value 0000 Step How to delete the set schedule Configure the alarm settings Alarm setup Configure the settings relating to the alarm action AlarmAlarm setup OFF Default setting Terminal alarm 1 to Auto modeDefault setting OFF Video loss CH1 to Command alarmAlarm image setup AUX name Alarm output terminal setupMail notification setup Panasonic alarm protocol Panasonic alarm protocol setupDefault setting OFF User name User authenticationDefault setting blank Password Retype password Access levelDefault setting OFF Access level Host authenticationConfigure the settings relating to the mail server Mail Configure the settings of the servers Server setupFTP mode Configure the settings relating to the FTP server FTPDefault setting Passive FTP server address Default setting blank Control portConfigure the network settings Network Configuring the network settings Network setupNetwork setup Default setting OFF IP addressDefault setting Manual Primary DNS, Secondary DNS Default gatewayDefault setting blank Line speed Default setting Auto FTP accessWAN Access interval Configure the settings relating to Ddns DdnsDefault setting OFF Host name Default setting blank User nameConfigure the settings relating to Snmp Snmp Default setting blank Unit locationCommunity name Default setting blank Interval Default setting OFF DirectoryFTP periodic transmission FTP periodic transmissionUncheck the check box of the desired day of the week Error message Maintenance of the unit MaintenanceCheck the system log System log Time & dateHow to upgrade the firmware Upgrade the firmware UpgradeInitialize/restart the unit Initialization Error indications relating to FTP Error indications relating to SmtpCategory Content Description About the Displayed System LogError indications relating to NTP Error indications relating to DdnsCause/solution TroubleshootingSymptom Symptom Symptom Symptom Operating Instructions Cause/solution Reference Pages Solutions Images are not displayed or refreshed smoothly Panasonic Canada Inc