Panasonic WJ-NT314 About the individual setup menu, Refresh interval of Jpeg monitoring clients

Page 29

[Number of JPEG monitoring clients]

[Number of JPEG receiving devices]

Select the number of users of each channel to monitor

Select the number of connected devices of each chan-

JPEG images on the browser.

nel to receive JPEG images.

[Refresh interval of JPEG monitoring clients]

The set value for refresh interval when monitoring JPEG images on the browser is displayed.

[Refresh interval of JPEG receiving devices]

The set value for refresh interval that can be secured when transmitting JPEG images to each connected device.

About the individual setup menu

It is possible to configure the settings for JPEG and MPEG-4 images of each channel individually. When configuring the settings, consider the network load carefully.

After configuring the settings in the individual setup menu and returning to the [JPEG/MPEG-4] menu, changed items are marked with "*".

[Return]

Returns to the [JPEG/MPEG-4] menu. (page 26)

[CH No.]

Select a channel to configure the setting.

* Refer to page 26 to 28 for setting items.

Note:

When setting "Refresh interval (JPEG)", note the fol- lowing.

When "OFF" is selected for "MPEG-4 transmis- sion" on the setup menu, the total refresh interval of all the selected channels shall be 40 fps or less. (When "QVGA" is selected for "Image cap- ture size", divide the value by four.)

(Example: When the set values are

CH1: VGA,10 fps,

CH2: VGA, 15 fps,

CH3: QVGA, 30fps,

CH4: QVGA, 30fps:

10 (CH1) + 15 (CH2) + 30/4 (CH3) + 30/4 (CH4) = 40 fps (Total))

When "ON" is selected for "MPEG-4 transmis- sion" in one or more channels, the total refresh

interval of all the selected channels shall be 15 fps or less. (When "QVGA" is selected for "Image capture size", divide the value by four.)

If the set values exceed these settings, the refresh interval of each channel may be lower.

The refresh interval may also be lower depending on the set value of "Image quality", the image contents, or the network status.

When the setting of each channel is changed indi- vidually, it is impossible to calculate an interval to refresh the displayed JPEG image.

29

Image 29
Contents Network Operating Instructions Contents About these operating instructions PrefaceTrademarks and registered trademarks Viewer SoftwareMonitor images from a single camera Monitor Images on a PCStep Refresh interval JpegAbout the Live 3Preset *2 0AUTO Mode *2W button *2 Zoom buttons *24Frame Alarm occurrence indication button *25Track 6Unit titleMonitor images from multiple cameras Action at an Alarm Occurrence Action at an Alarm OccurrenceAlarm type Intruder detection About the image recognition functionDetection of abandoned or removed objects About Avmd Advanced Video Motion DetectionTrack About Live page when Avmd is activatedTransmit Images onto an FTP Server Obtain images on the SD memory card Save images on the SD memory cardDirectory structure of sddata Equipped security functions Access restrictions by changing the Http portAbout the Network Security of This Unit How to display the setup menu How to operate the setup menu About the operation window Network setup button Server setup buttonMaintenance button 3SetupConfigure the basic settings Basic Configure the basic settings of the unit Basic setupDefault setting Real time Alarm status update modeAlarm status port Available value 1 Default settingConfigure the settings relating to the NTP server NTP Information about SD memory card SD memory card setupSize of SD Image quality Memory card Super fine Fine Image capture size VGADefault setting 1 bit Communication speed Default setting None Stop bitDefault setting 8 bit Image capture size QvgaCH selection Total bit rateJpeg setup Calculation of refresh interval Jpeg Refresh interval of Jpeg monitoring clients About the individual setup menuRefresh interval of Jpeg receiving devices ReturnZoom buttons, Focus buttons, Control pad/buttons Configure the settings relating to camera CameraAbout the operation panel Configure the settings relating to audio Audio Cable compensation AuthenticationAudio output port PC to Unit Default setting blank IP address Configures the multi-screen settings Multi-screen setupAvailable value -, 1 Default setting Camera title Set the detection program Avmd Configure the Avmd settings Video analytics setupNumber of characters that can be entered 1 20 characters Available value blank, 1 StepStep Set the depth automatically Set the detection depthSet the depth manually Available value 0000 Step How to configure the schedule settingsSet the Avmd schedule Schedule How to delete the set schedule Alarm setup Configure the alarm settings Alarm setupConfigure the settings relating to the alarm action Alarm OFF Default setting Terminal alarm 1 to Auto modeDefault setting OFF Video loss CH1 to Command alarmAlarm image setup AUX name Alarm output terminal setupMail notification setup Panasonic alarm protocol Panasonic alarm protocol setupDefault setting OFF User name User authenticationDefault setting blank Password Retype password Access levelDefault setting OFF Access level Host authenticationConfigure the settings relating to the mail server Mail Configure the settings of the servers Server setupFTP mode Configure the settings relating to the FTP server FTPDefault setting Passive FTP server address Default setting blank Control portConfigure the network settings Network Configuring the network settings Network setupNetwork setup Default setting OFF IP addressDefault setting Manual Primary DNS, Secondary DNS Default gatewayDefault setting blank Line speed Default setting Auto FTP accessWAN Access interval Configure the settings relating to Ddns DdnsDefault setting OFF Host name Default setting blank User nameCommunity name Configure the settings relating to Snmp SnmpDefault setting blank Unit location Default setting blank Interval Default setting OFF DirectoryFTP periodic transmission FTP periodic transmissionUncheck the check box of the desired day of the week Error message Maintenance of the unit MaintenanceCheck the system log System log Time & dateHow to upgrade the firmware Upgrade the firmware UpgradeInitialize/restart the unit Initialization Error indications relating to FTP Error indications relating to SmtpCategory Content Description About the Displayed System LogError indications relating to NTP Error indications relating to DdnsCause/solution TroubleshootingSymptom Symptom Symptom Symptom Operating Instructions Cause/solution Reference Pages Solutions Images are not displayed or refreshed smoothly Panasonic Canada Inc