Set the detection depth
It is possible to set the depth information for each detec- tion program both automatically and manually.
•Set the depth automatically (☞ page 36)
• Set the depth manually | (☞ page 37) |
Set the depth automatically
Note:
To set the depth automatically, have a person move forward and backward several times within the image being detected.
Step 1
Click the [SET] button of "Depth correction" on the [AVMD] tab.
→The "Depth correction" menu will be displayed.
Step 2
Select "Auto setup" for "Setup mode".
Step 3
Click the [START] button of "Auto setup" – "Depth cal- culation".
Step 4
The person moves forward and backward several times within the image at the preset position of the selected channel.
→Calculation result will be displayed in 3D on the screen. The result will be refreshed every second. When the depth is properly calculated (or when the 3D display become stable), click the [STOP] button.
Step 5
Click the [SAVE] button after completing the depth set- tings.
→Returns to the "Detection area setup" menu.
Note:
Click the [RETURN] button to return to the "Detection area setup" menu without setting the depth.
36