W button *2, Zoom buttons *2, Focus buttons *2

uB/W button (*2)

Click the desired button to switch color (colour) of the displayed images between color (colour) and B/W.

: Images will be displayed in B/W (black and white).

: Images will be displayed in color (colour).

: Activates Auto 1 mode. (The camera selects black and white mode if the picture

is dark, or color mode if the picture is bright enough.) If the camera has only one AUTO mode, click this button.

: Activates Auto 2 mode. (The camera detects the light source type to prevent

malfunction. This setting is applicable when using a near-infrared light source in a dark place.)

iZOOM buttons (*2)

: Click this button to adjust the zoom ratio to the WIDE side.

: Click this button to set the zoom ratio to x1.0.

: Click this button to adjust the zoom ratio to the TELE side.

oFOCUS buttons (*2)

: Click this button to adjust the focus auto- matically.

: Click this button to adjust the focus to the NEAR side.

: Click this button to adjust the focus to the FAR side.

!0AUTO MODE (*2)

Select an operation from the pull-down menu and click the [START] button. The selected operation will start.

Click the [STOP] button to stop the operation. The selected operation will stop when the camera (panning/tilting/zooming/focusing) is operated. Auto pan: Automatically pans between the start

position and the end position set in advance. Even when the camera is operated for zooming or focusing, the camera continues panning.

Sort: Sequentially switches between preset posi- tions counterclockwise, starting from the camera home position.

Sequence: Automatically moves to the preset posi- tions orderly (start from the lowest preset posi- tion number).

Patrol: Operates the camera in accordance with patrol function settings.

Auto track: Performs auto track when the camera supports auto track (AUTO TRACK).

Notes:

•To activate "Auto pan", "Sort", "Sequence", or "Patrol", it is required to perform the settings on the SETUP MENU of camera in advance. (☞ page 28)

•To check if the camera supports auto track, refer to the operating instructions of the camera.

!1Control pad/buttons (*2)

: Left-click on the control pad or buttons to adjust the horizontal/vertical position of the camera (panning/tilting).

Panning/tilting speed will be faster if a clicked point gets farther from the center point of the control pad.

It is also possible to pan/tilt the camera by dragging the mouse.

When the upper half area of the control pad is right- clicked, the displayed image will be zoomed in. When the lower half area is right-clicked, the dis- played image will be zoomed out on. When the left half area is right-clicked, the focus will be adjusted to the NEAR side. When the right half area is right- clicked, the focus will be adjusted to the FAR side.

!2BRIGHTNESS buttons (*2)

: The displayed image will be darker.

: The adjusted brightness will return to the default brightness.:

: The displayed image will be brighter.

Note:

When the BRIGHTNESS buttons are clicked while the camera is at the preset position, the adjusted brightness will automatically be registered for the current preset position.

!3Preset (*2)

Select a preset position from the pull-down menu and click the [GO] button. The camera will move to the selected preset position. When "Home position" is selected, the camera will move to the home posi- tion.

To activate preset positions and home position, it is required to configure the settings on the SETUP MENU of camera in advance. (☞ page 28)