Configure the AVMD settings [Video analytics setup]
The settings relating to the detection area, depth, and schedule for AVMD can be configured on the "Video analytics setup" page.
The "Video analytics setup" page has 2 tabs of the [AVMD] tab, and the [Schedule] tab.
Set the detection program [AVMD]
Click the [AVMD] tab on the "Video analytics setup" page.
Set the detection program for AVMD. It is possible to set up to 8 preset positions (CH1 to CH4) for 8 detection pro- grams.
It is possible to set intruder detection area (3 types), object abandonment / removal detection area, and an area not to activate AVMD.
When editing the detection program, perform the same procedure.
Important:
The detection program will not be applied to the AVMD function only with setting. To apply the setting, select the detection program for "AVMD" of the [Alarm] tab on the "Alarm setup" page. (☞ page 40) However, up to 2 chan- nels of CH1 to CH4 are available.
Step 1
Select the title of desired detection program from "Detection program", and click the [DISPLAY] button.
→Setup items will be displayed.
34
Note:
When the detection program has already been set, the edited titles will be displayed on the
Step 2
Enter the title in "Detection program title".
Number of characters that can be entered: 1 - 20 characters
When "Detection program title" is blank, the default set- ting will be applied.
Default setting:
Step 3
Select the channel to activate the AVMD from "CH No.". Available value: 1 - 4
Step 4
Enter the preset position number to activate the AVMD in "Preset No.", and click the [GO] button.
Available value: (blank), 1 - 256
Step 5
Select the area to detect an intruder, object abandon- mentt, or object removal.
qClick one of the icons from