Panasonic WJ-NT314 manual Configures the multi-screen settings Multi-screen setup

Configures the multi-screen settings [Multi-screen setup]

The cameras to be used for the multi-screen display can be registered on this page. The following cameras are available for the multi-screen display. (As of August, 2007)

Cameras connected to WJ-NT314, cameras connected to the network, WV-NP240 series, WV-NP1000 series, WV-NW470S series, WV-NP472, WV-NS320 series, WV-NS202, WV-NF284, WV-NS202A, WJ-NT304

[CH No.]

Select a desired channel number (CH1 to 4) when dis- playing images on a multi-screen using a network device with channel information such as this unit. Select "-" when displaying images on a multi-screen using a device without channel information.

Available value: -, 1 - 4

Default setting: -

[Camera title]

Enter the title of the camera. The entered camera title will be displayed on a multi-screen.

Number of characters that can be entered: 0 - 20

characters

Default setting: (blank)

[IP address]

Enter the IP address or the host name of the camera to be used for the multi-screen. 4 cameras can be regis- tered as a group and up to 4 groups (16 cameras) can be registered.

When the HTTP port number for the camera had been changed, enter as follows: (Example:

192.168.0.10: 8080)

Number of characters that can be entered: 1 - 128

characters

Default setting: (blank)

Notes:

•When using the host name, it is necessary to config- ure the DNS settings of the PC in use.

•When displaying images from cameras connected to this unit on a multi-screen, set the IP address of the unit.

33