Panasonic WJ-NT314 manual Monitor images from multiple cameras, Step

*1 Operable by only users and hosts whose access level is "1. Administrator"

*2 Only operable by users and hosts whose access level is "1. Administrator" or "2. Camera control" when "ON" is selected for "User authentication"

(☞ page 46) and "Host authentication" (☞ page 47).

*3 Operable by users and hosts who belong to the access level selected for "Authentication" on the [Audio] tab of the "Camera setup" page. (☞ page 32)

Refer to page 46 for further information about the access level.

Important:

It is impossible to display images and to receive/ transmit audio between the unit and the PC when the viewer software "Network Camera View3" is not installed on the PC. (Refer to the operating instruc- tions for descriptions of how to install.)

Monitor images from multiple cameras

Images from multiple cameras can be displayed on a multi-screen. Images from 4 cameras can be displayed simul- taneously. To display images on a multi-screen, it is necessary to register cameras in advance. 4 cameras can be registered as a group and up to 4 groups (16 cameras) can be registered. (☞ page 33)

Important:

•Select "OFF" for both the user authentication and the host authentication of the network device to be registered.

•Only JPEG images can be displayed on a multi-screen. Audio will not be heard.

•Multi-screen is the function that is available using this unit.

When the power is turned off or the LAN cable is disconnected while displaying images, displaying images on a multi-screen will become unavailable.

Step 1

Click one of the multi-screen buttons.

→Images from the registered cameras will be displayed on a 4-split screen.

qTo display images on a single screen, click the [1] button or [Live] button.

wClick a camera title. Live images from the camera corresponding to the clicked camera title will be dis- played on the "Live" page of the newly opened win- dow.

q w

8