Panasonic WJ-NT314 manual Total bit rate, CH selection

Configure the settings relating to images and audio [Camera setup]

The settings relating to JPEG/MPEG-4 images and camera operation can be configured on the "Camera setup" page.

The "Camera setup" page has 4 tabs of the [JPEG/MPEG-4] tab, the [Camera] tab, [Audio] tab and the [Coaxial setup] tab.

Configure the settings relating to JPEG/MPEG-4 image [JPEG/MPEG-4]

Click the [JPEG/MPEG-4] tab on the "Camera setup" page.

Configure the settings relating to JPEG/MPEG-4 image such as "Max bit rate (per 1 client)", "Image capture size", "Image quality", etc. in this section. These settings are common among each channel. To configure each channel setting individually, press [To individual setup] button.

[Total bit rate]

Select the total bit rate for data transmission from the followings.

Unlimited/64 kbps/128 kbps/256 kbps/512 kbps/

1024 kbps/2048 kbps/4096 kbps/8192 kbps/16384 kbps Default setting: Unlimited

Notes:

• When selecting "64 kbps", select "OFF" for "Audio mode" on the "Audio" tab. (☞ page 31) Otherwise, images cannot be transmitted correctly.

• When "64 kbps" or "128 kbps" is selected, do not carry out the live-transmission of JPEG images and the FTP periodic transmission simultaneously. Otherwise, images cannot be transmitted correctly.

• Even when "Unlimited" is set for "Total bit rate", image data whose total size is 20 Mpbs or more may be destroyed during transmission.

• The actual total bit rate may be approx. twice the set value when MPEG-4 transmission is carried out in combination with JPEG transmission or FTP trans- mission.

[CH selection]

Select the channel number of VIDEO IN connector from the following.

CH1 only/CH1-2/CH1-3/CH1-4 Default setting: CH1-4

Important:

The set values of JPEG setup and MPEG-4 setup are common among each channel.

26