Panasonic WJ-NT314 manual Mail notification setup

Configure the settings relating to the mail notification [Notification]

Click the [Notification] tab on the "Alarm setup" page. (☞ page 40)

The settings relating to the alarm mail can be configured on this page. To notify of an alarm occurrence by e-mail, it is necessary to configure the settings of the mail server. (☞ page 48)

■E-mail notification setup

[To E-mail server setup]

When "To E-mail server setup" is clicked, the [Mail] tab of the "Server setup" page will be displayed. (☞ page 48)

[E-mail notification]

Select "ON" or "OFF" to determine whether or not to notify of an alarm occurrence by e-mail at an alarm occurrence.

Default setting: OFF

■E-mail notification setup

[Address 1] to [Address 4]

Enter the destination mail address. Up to 4 destination addresses can be registered.

To notify by e-mail when an alarm occurred, check the "Alarm" checkbox respective to the desired address. To delete the registered address, click the [DEL] button respective to the desired address.

Number of characters that can be entered: 3 - 128

characters

Default setting: (blank)

[Mail subject]

Enter the mail subject.

Number of characters that can be entered: 0 - 50

characters

Default setting: (blank)

[Mail body]

Enter the mail body.

Number of characters that can be entered: 0 - 200

characters

Default setting: (blank)

Notes:

•By entering "%p%", it is possible to transmit alarm type and channel information.

•By entering %y%”, “%m%”, “%d%”, or “%t%”, it is possible to transmit the year, month, date or time information only.

%y%: Year when the alarm occurs

%m%: Month when the alarm occurs

%d%: Date when the alarm occurs

%t%: Time when the alarm occurs

When the mail body is blank, year, month, date and time information will be transmitted.

44