Panasonic WJ-NT314 manual Save images on the SD memory card, Obtain images on the SD memory card

Page 13

Save images on the SD memory card when failed to transmit images by the FTP periodic transmission function

Images that have failed to transmit using the FTP periodic transmission can be saved automatically on the SD mem- ory card.

When using the "SD memory REC" function of a Panasonic’s network disk recorder, select "OFF" for the "FTP peri- odic transmission" function. (page 55) Refer to the operating instructions of network disk recorder for further infor- mation.

We make no guarantee for any damages of files on the SD memory card incurred by malfunction or error occurrence in files saved on the SD memory card regardless of what the cause may be.

Possible capacity of images that can be saved on the SD memory card will be different depending on the number of selected channels (page 26), image capture size (page 27), and image quality (page 27).

When using an SD memory card, it is recommended to check the recording condition and select "5 sec" or longer for "Interval" on the [FTP] tab. (page 55)

Save images on the SD memory card

By selecting "Use" for "About SD memory card" on the [SD memory card] tab of the "Basic setup" page (page 23), saving images which had been failed to transmit to the FTP server using the FTP periodic transmission function will become available.

Obtain images on the SD memory card

Step 1

Access the unit using the Windows® command prompt or FTP client software.

The window with the user name and password entry fields will be displayed. On the FTP server, only access the "sd_data" directory.

Note:

When accessing this unit via the FTP server, select "Allow" for "FTP access" on the [Network] tab of the "Network setup" page. (page 51)

Step 2

Enter the user name whose access level is "1. Administrator" and its password.

Log in the unit.

Note:

The default user name with the access level "1. Administrator" and its password are as follows. User name: admin

Password: 12345

To enhance the security, it is recommended to change the password for the administrator periodically. (page 46)

13

Image 13
Contents Network Operating Instructions Contents About these operating instructions PrefaceTrademarks and registered trademarks Viewer SoftwareMonitor images from a single camera Monitor Images on a PCStep Refresh interval JpegAbout the Live 3Preset *2 0AUTO Mode *2W button *2 Zoom buttons *24Frame Alarm occurrence indication button *25Track 6Unit titleMonitor images from multiple cameras Alarm type Action at an Alarm OccurrenceAction at an Alarm Occurrence Intruder detection About the image recognition functionDetection of abandoned or removed objects About Avmd Advanced Video Motion DetectionTrack About Live page when Avmd is activatedTransmit Images onto an FTP Server Obtain images on the SD memory card Save images on the SD memory cardDirectory structure of sddata About the Network Security of This Unit Access restrictions by changing the Http portEquipped security functions How to display the setup menu How to operate the setup menu About the operation window Network setup button Server setup buttonMaintenance button 3SetupConfigure the basic settings Basic Configure the basic settings of the unit Basic setupDefault setting Real time Alarm status update modeAlarm status port Available value 1 Default settingConfigure the settings relating to the NTP server NTP Information about SD memory card SD memory card setupSize of SD Image quality Memory card Super fine Fine Image capture size VGADefault setting 1 bit Communication speed Default setting None Stop bitDefault setting 8 bit Image capture size QvgaCH selection Total bit rateJpeg setup Calculation of refresh interval Jpeg Refresh interval of Jpeg monitoring clients About the individual setup menuRefresh interval of Jpeg receiving devices ReturnAbout the operation panel Configure the settings relating to camera CameraZoom buttons, Focus buttons, Control pad/buttons Configure the settings relating to audio Audio Audio output port PC to Unit AuthenticationCable compensation Available value -, 1 Default setting Camera title Configures the multi-screen settings Multi-screen setupDefault setting blank IP address Set the detection program Avmd Configure the Avmd settings Video analytics setupNumber of characters that can be entered 1 20 characters Available value blank, 1 StepStep Set the depth automatically Set the detection depthSet the depth manually Set the Avmd schedule Schedule How to configure the schedule settingsAvailable value 0000 Step How to delete the set schedule Configure the settings relating to the alarm action Alarm Configure the alarm settings Alarm setupAlarm setup OFF Default setting Terminal alarm 1 to Auto modeDefault setting OFF Video loss CH1 to Command alarmAlarm image setup AUX name Alarm output terminal setupMail notification setup Panasonic alarm protocol Panasonic alarm protocol setupDefault setting OFF User name User authenticationDefault setting blank Password Retype password Access levelDefault setting OFF Access level Host authenticationConfigure the settings relating to the mail server Mail Configure the settings of the servers Server setupFTP mode Configure the settings relating to the FTP server FTPDefault setting Passive FTP server address Default setting blank Control portConfigure the network settings Network Configuring the network settings Network setupNetwork setup Default setting OFF IP addressDefault setting Manual Primary DNS, Secondary DNS Default gatewayDefault setting blank Line speed Default setting Auto FTP accessWAN Access interval Configure the settings relating to Ddns DdnsDefault setting OFF Host name Default setting blank User nameDefault setting blank Unit location Configure the settings relating to Snmp SnmpCommunity name Default setting blank Interval Default setting OFF DirectoryFTP periodic transmission FTP periodic transmissionUncheck the check box of the desired day of the week Error message Maintenance of the unit MaintenanceCheck the system log System log Time & dateHow to upgrade the firmware Upgrade the firmware UpgradeInitialize/restart the unit Initialization Error indications relating to FTP Error indications relating to SmtpCategory Content Description About the Displayed System LogError indications relating to NTP Error indications relating to DdnsCause/solution TroubleshootingSymptom Symptom Symptom Symptom Operating Instructions Cause/solution Reference Pages Solutions Images are not displayed or refreshed smoothly Panasonic Canada Inc