Installation Mounting Locations | Rockford Fosgate T1000-4 instruction

Rockford Fosgate T1000-4 Installation Mounting Locations, Battery and Charging, Wiring the System

INSTALLATION

MOUNTING LOCATIONS

Engine Compartment

Never mount this unit in the engine compartment. Mounting the unit in the engine compartment will void your warranty.

Trunk Mounting

Mounting the amplifier vertically or inverted will provide adequate cooling of the amplifier. Mounting the amplifier on the floor of the trunk will provide the best cooling of the amplifier.

Passenger Compartment Mounting

Mounting the amplifier in the passenger compartment will work as long as you provide a sufficient amount of air for the amplifier to cool itself. If you are going to mount the amplifier under the seat of the vehicle, you must have at least 1" (2.54cm) of air gap around the amplifier's heatsink.

Mounting the amplifier with less than 1" (2.54cm) of air gap around the amplifier's heatsink in the passenger compartment will not provide proper cooling and will severely affect the performance of the amplifier and is strongly not recommended.

BATTERY AND CHARGING

Amplifiers will put an increased load on the vehicle's battery and charging system.We recommend checking your alternator and battery condition to ensure that the electrical system has enough capacity to handle the increased load of your stereo system. Stock electrical systems which are in good condition should be able to handle the extra load of any Power Series amplifier without problems, although battery and alternator life can be reduced slightly.To maximize the performance of your amplifier, we suggest the use of a heavy duty battery and an energy storage capacitor.

WIRING THE SYSTEM

:If you do not feel comfortable with wiring your new unit, please see your CAUTION local Authorized Rockford Fosgate Dealer for installation.

:Before installation, disconnect the battery negative (-) terminal to prevent CAUTION damage to the unit, fire and/or possible injury.

:Avoid running power wires near the low level input cables, antenna, power CAUTION leads, sensitive equipment or harnesses.The power wires carry substantial

current and could induce noise into the audio system. NOTE: Use the Allen wrench provided to tighten the power and speaker terminals.

1. Plan the wire routing. Keep RCA cables close together but isolated from the amplifier's power cables and any high power auto accessories, especially electric motors.This is done to prevent coupling the noise from radiated electrical fields into the audio signal.When feeding the wires through the firewall or any metal barrier, protect them with plastic or rubber grommets to prevent

short circuits. Leave the wires long at this point to adjust for a precise fit at a later time.

NOTE:We recommend a 1/0 AWG wire for use on the power (B+) and ground (GND) connections.

2. Prepare the RED wire (power cable) for attachment to the amplifier by stripping 7/8" of

insulation from the end of the wire. Insert the bared wire into the B+ terminal and tighten the

set screw to secure the cable in place.

NOTE:The B+ cable MUST be fused 18" or less from

the vehicle's battery. Install the fuseholder under the hood and ensure connections are

water tight.

T1000-4 specifications

The Rockford Fosgate T1000-4 is a powerful and versatile amplifier designed to deliver high-performance audio output in car audio systems. As part of Rockford Fosgate's Punch series, this amplifier exemplifies the brand’s commitment to quality and innovation, catering to enthusiasts seeking exceptional sound quality and reliability.

One of the standout features of the T1000-4 is its 1000-watt power output, which is capable of driving multiple speakers or subwoofers with ease. It provides flexibility for users looking to build a robust audio system, whether for daily driving or competitive environments. The amplifier is designed with a full-range architecture, allowing it to effectively power a wide range of speakers with great clarity and detail.

The T1000-4 employs a Class AD amplification technology, which combines the efficiency of Class D amplifiers with the sound quality characteristics of Class A/B amplifiers. This design results in lower heat generation and improved energy efficiency, making it ideal for extended listening sessions without the risk of overheating.

Additionally, the amplifier features a variable 12 dB/octave high-pass and low-pass crossover, enabling users to tailor their audio experience according to personal preferences and speaker requirements. The built-in equalizer allows for fine-tuning sound profiles, ensuring that every note and nuance is heard distinctly.

The T1000-4 also boasts a compact design, incorporating advanced heatsinking for effective thermal management. This not only aids in enhancing performance but also facilitates easier installation in various vehicle setups. The amplifier is equipped with high-level inputs, allowing it to connect seamlessly with factory-installed audio systems without requiring additional modifications.

Durability is another hallmark of the T1000-4, featuring a rugged build quality designed to withstand the rigors of automotive environments. The amplifier's connectors are also designed to minimize installation complexity while ensuring a secure connection, contributing to the overall reliability of the system.

In summary, the Rockford Fosgate T1000-4 amplifier stands out for its robust power output, Class AD technology, customizable crossover and equalization settings, along with its compact, durable design. This amplifier is an excellent choice for car audio enthusiasts aiming to achieve a powerful, clear, and dynamic sound experience on the road.