Chapter 3 Upgrading to BCM 4.0 and SRG 1.5 23
Figure 4 BCM Upgrade Wizard sign-in page
5Enter the IP address of the system being upgraded in the IP Address box.
The IP address format is xxx.xxx.xxx.xxx; press the space bar to move between fields.
6In the Password box, enter PlsChgMe! as the password. The username is entered automatically as ee_admin.
Note: You must use PlsChgMe! for the password or the upgrade will not proceed.
7Click Browse for keycode file to select the keycode file to install on the BCM system. You cannot proceed with the upgrade without the correct keycode.
The BCM 4.0 Upgrade keycode is required to upgrade to BCM 4.0, and the SRG 1.5 Upgrade keycode is required to upgrade to SRG 1.5.
If you are uncertain about how to obtain a keycode, click the How do I get a Keycode? button or refer to the Keycode Installation Guide.
Upgrade Guide