Nortel Networks Unpacking and inspecting the Secure Router 4134 chassis, Step Action

Page 29

.

29

Installing the Secure Router 4134 chassis and hardware components

For detailed instructions about how to install the Secure Router 4134 and its hardware components, see Nortel Secure Router 4134 Installation — Chassis (NN47263-300) and Nortel Secure Router 4134 Installation — Hardware Components (NN47263-301).

The Secure Router 4134 ships with the fan tray installed, as well as the power supply unit or units that you ordered. If you must replace a fan tray or power supply unit, or if you choose to install a second power supply unit, see Nortel Secure Router 4134 Installation — Hardware Components (NN47263-301).

Unpacking and inspecting the Secure Router 4134 chassis

Use the information in this section to verify you have received all accessories that ship with the Secure Router 4134.

Procedure steps

Step Action

1Remove the shipping container.

2Place the chassis on antistatic material.

3Check all items for damage.

--End--

ATTENTION

If you detect any damage, do not install the chassis. Call the Nortel Technical Solutions Center in your area.

The following table lists the accessories you can find in the shipping container with the Secure Router 4134. Place a mark in the third column of the table to verify that you have received each accessory.

Nortel Secure Router 4134

Quick Start

NN47263-100 02.01 Standard

18 February 2008

Copyright © 2007, 2008 Nortel Networks

Image 29
Contents Quick Start Page Contents Introduction Power cord warning statement Copyright 2007, 2008 Nortel Networks FCC statement USA only International Regulatory Statements of ConformityCE marking statement Europe only EN 55022 statements TIA-968-AEN 300386 statement EN 55024 statementMIC notice Republic of Korea only Vcci statement Japan/Nippon onlyBsmi statement Taiwan only EN 60950 statement National Safety Statements of ComplianceNOM statement Mexico only Información NOM unicamente para MéxicoRoHS Directive Compliance Statement National Environmental Statements of ComplianceDenan statement Japan/Nippon only Weee Directive Compliance Statement Safety messagesWarnung Warnung Hardware Notice Risiko einer Augenverletzung durch Laser Foreign Exchange Station FXS Interface ModulesModule protection Personal safety and equipment protectionForeign Exchange Office FXO Interface Modules Electrostatic discharge Cables and connectors protectionAntistatic material Interface modules FeaturesNew in this release Navigation IntroductionIntroduction Secure Router 4134 installation and initial configuration Secure Router 4134 installation and initial configuration Copyright 2007, 2008 Nortel Networks Secure Router 4134 installation and initial configuration Step Action Unpacking and inspecting the Secure Router 4134 chassisSecure Router 4134 accessories Accessory Function Verified Installing a power supply modulePrerequisites Installing the mounting brackets on the chassisAverage time to install mounting brackets 2 minutes Prerequisites Installing the chassis Risk of injury Grounding the chassis Grounding the chassis Achtung Installing the interface modules Slot numbering legend printed on the Secure Router Foreign Exchange Office FXO Interface Modules Installing a Small ModuleInstalling a Large Module Installing a Medium ModuleInstalling a Small Module in the Voice Carrier Medium Module Voice Carrier Medium Module slot numbering Prerequisites Connecting AC power cables Connecting power cablesConnecting DC power Average time to install one DC power cable 3 minutes Switch off the DC power source Copyright 2007, 2008 Nortel Networks End Verifying a successful installation Powering up the routerLogon prompt appears on the console screen Copyright 2007, 2008 Nortel Networks Connecting a terminal for local access Configuring the Secure Router 4134 for remote accessEstablishing remote access Login admin Password setup Using SSH for remote accessEnable Changing the default administrator passwordChanging the default administrator password Configuring the Secure Router 4134 for remote access Appendix Environmental requirements Environmental requirements Class a device caution statement Appendix Translations of safety messagesCuidado Qualified service personnel warning statementAviso Overcurrent warning statementCover plate warning statement Power cord warning statement Peligro Page Quick Start