Nortel Networks 4134 quick start Changing the default administrator password, Enable

Page 58

58Configuring the Secure Router 4134 for remote access

Procedure steps

Step Action

1To access configuration mode, enter: configure terminal

2To access the SSH key generation subtree, enter: ssh_keygen

3To generate the DSA key, enter: generate dsa

4To generate the RSA key, enter: generate rsa

5To exit the SSH key generation subtree, enter: exit

6To enable the SSH connection, enter: ssh_server

enable

7To save the configuration, enter: save local

--End--

You can now access and configure the Secure Router 4134 remotely.

For additional system configuration, see Nortel Secure Router 4134 — Commissioning (NN47263-302). To configure features on your Secure Router 4134, see Nortel Secure Router 4134 — Documentation Roadmap (NN47263-103) for a list of Nortel Secure Router 4134 documents and information about the Release 10.1 features.

Changing the default administrator password

Nortel recommends that you change the default administrator password for security reasons.

Procedure steps

Step Action

1To access password configuration mode, enter: password

The Secure Router 4134 prompts you for the current user name.

2Enter the default user name: admin

The Secure Router 4134 prompts you for the old password.

Nortel Secure Router 4134

Quick Start

NN47263-100 02.01 Standard

18 February 2008

Copyright © 2007, 2008 Nortel Networks

Image 58

Contents Quick Start Page Contents Introduction Power cord warning statement Copyright 2007, 2008 Nortel Networks International Regulatory Statements of Conformity FCC statement USA onlyTIA-968-A CE marking statement Europe only EN 55022 statementsEN 55024 statement EN 300386 statementBsmi statement Taiwan only Vcci statement Japan/Nippon onlyMIC notice Republic of Korea only NOM statement Mexico only National Safety Statements of ComplianceEN 60950 statement Información NOM unicamente para MéxicoDenan statement Japan/Nippon only National Environmental Statements of ComplianceRoHS Directive Compliance Statement Safety messages Weee Directive Compliance StatementWarnung Warnung Hardware Notice Foreign Exchange Station FXS Interface Modules Risiko einer Augenverletzung durch LaserForeign Exchange Office FXO Interface Modules Personal safety and equipment protectionModule protection Cables and connectors protection Electrostatic dischargeAntistatic material Features Interface modulesNew in this release Introduction NavigationIntroduction Secure Router 4134 installation and initial configuration Secure Router 4134 installation and initial configuration Copyright 2007, 2008 Nortel Networks Secure Router 4134 installation and initial configuration Unpacking and inspecting the Secure Router 4134 chassis Step ActionInstalling a power supply module Secure Router 4134 accessories Accessory Function VerifiedInstalling the mounting brackets on the chassis PrerequisitesAverage time to install mounting brackets 2 minutes Prerequisites Installing the chassis Risk of injury Grounding the chassis Grounding the chassis Achtung Installing the interface modules Slot numbering legend printed on the Secure Router Installing a Small Module Foreign Exchange Office FXO Interface ModulesInstalling a Medium Module Installing a Large ModuleInstalling a Small Module in the Voice Carrier Medium Module Voice Carrier Medium Module slot numbering Prerequisites Connecting power cables Connecting AC power cablesConnecting DC power Average time to install one DC power cable 3 minutes Switch off the DC power source Copyright 2007, 2008 Nortel Networks End Powering up the router Verifying a successful installationLogon prompt appears on the console screen Copyright 2007, 2008 Nortel Networks Configuring the Secure Router 4134 for remote access Connecting a terminal for local accessEstablishing remote access Using SSH for remote access Login admin Password setupChanging the default administrator password EnableChanging the default administrator password Configuring the Secure Router 4134 for remote access Appendix Environmental requirements Environmental requirements Appendix Translations of safety messages Class a device caution statementQualified service personnel warning statement CuidadoOvercurrent warning statement AvisoCover plate warning statement Power cord warning statement Peligro Page Quick Start