Nortel Networks 4134 quick start Appendix Environmental requirements

Page 61

.

61

Appendix

Environmental requirements

The Secure Router 4134 must operate within the specified tolerance limits shown in Table 4 "Environmental requirements for the Secure Router 4134" (page 61).

ATTENTION

Install the Secure Router 4134 in a restricted-access location. Limit access to the Nortel Secure Router 4134 to authorized service personnel only. Ensure you allow 2 to 3 feet (0.61 to 0.91 m) of additional clearance around the Secure Router 4134 for access to the cable connectors on the front and rear panels. For more information on hardware specifications, installation, and clearance requirements for the Secure Router 4134, see Nortel Secure Router 4134 Installation — Chassis (NN47263-300).

WARNING

Do not install the Secure Router 4134 near a standing or running water source or in a high-humidity environment.

WARNING

Warnung

Installieren Sie den Secure Router 4134 nicht in der Nähe von stehenden oder fließenden Gewässern oder in einem Gebiet mit sehr hoher Feuchtigkeit.

Table 4

Environmental requirements for the Secure Router 4134

Parameter

 

Range

 

 

 

Operating temperature

 

0 to 40 C

 

 

 

Short-term temperature

 

–40 C to 70 C

 

 

 

Operating altitude

 

0–11 800 ft (0–3600 m)

 

 

 

Storage altitude

 

0–35 000 ft (0–11 000 m)

 

 

 

Operating humidity

 

0 to 90% R.H. (noncondensing)

 

 

 

 

 

 

Nortel Secure Router 4134

 

Quick Start

 

NN47263-100 02.01 Standard

 

18 February 2008

Copyright © 2007, 2008 Nortel Networks

Image 61
Contents Quick Start Page Contents Introduction Power cord warning statement Copyright 2007, 2008 Nortel Networks FCC statement USA only International Regulatory Statements of ConformityCE marking statement Europe only EN 55022 statements TIA-968-AEN 300386 statement EN 55024 statementBsmi statement Taiwan only Vcci statement Japan/Nippon onlyMIC notice Republic of Korea only EN 60950 statement National Safety Statements of ComplianceNOM statement Mexico only Información NOM unicamente para MéxicoDenan statement Japan/Nippon only National Environmental Statements of ComplianceRoHS Directive Compliance Statement Weee Directive Compliance Statement Safety messagesWarnung Warnung Hardware Notice Risiko einer Augenverletzung durch Laser Foreign Exchange Station FXS Interface ModulesForeign Exchange Office FXO Interface Modules Personal safety and equipment protectionModule protection Electrostatic discharge Cables and connectors protectionAntistatic material Interface modules FeaturesNew in this release Navigation IntroductionIntroduction Secure Router 4134 installation and initial configuration Secure Router 4134 installation and initial configuration Copyright 2007, 2008 Nortel Networks Secure Router 4134 installation and initial configuration Step Action Unpacking and inspecting the Secure Router 4134 chassisSecure Router 4134 accessories Accessory Function Verified Installing a power supply modulePrerequisites Installing the mounting brackets on the chassisAverage time to install mounting brackets 2 minutes Prerequisites Installing the chassis Risk of injury Grounding the chassis Grounding the chassis Achtung Installing the interface modules Slot numbering legend printed on the Secure Router Foreign Exchange Office FXO Interface Modules Installing a Small ModuleInstalling a Large Module Installing a Medium ModuleInstalling a Small Module in the Voice Carrier Medium Module Voice Carrier Medium Module slot numbering Prerequisites Connecting AC power cables Connecting power cablesConnecting DC power Average time to install one DC power cable 3 minutes Switch off the DC power source Copyright 2007, 2008 Nortel Networks End Verifying a successful installation Powering up the routerLogon prompt appears on the console screen Copyright 2007, 2008 Nortel Networks Connecting a terminal for local access Configuring the Secure Router 4134 for remote accessEstablishing remote access Login admin Password setup Using SSH for remote accessEnable Changing the default administrator passwordChanging the default administrator password Configuring the Secure Router 4134 for remote access Appendix Environmental requirements Environmental requirements Class a device caution statement Appendix Translations of safety messagesCuidado Qualified service personnel warning statementAviso Overcurrent warning statementCover plate warning statement Power cord warning statement Peligro Page Quick Start