Nortel Networks 4134 quick start Prerequisites

Page 45

Installing the interface modules 45

CAUTION

Risk of equipment damage

Always handle interface modules by the edges, or use the levers, where applicable.

CAUTION

ACHTUNG

Risiko eines Geräteschadens

Berühren Sie Interfacemodule immer an den Rändern, oder verwenden Sie die Hebel, sofern vorhanden.

CAUTION

If you do not install a module in the slot, be sure to keep the metal cover plate in place over the slot. Removing the cover plate impedes airflow and proper cooling of the unit.

CAUTION

ACHTUNG

Wenn Sie in kein Modul in diesem Steckplatz installieren, stellen Sie sicher, dass sich die Abdeckplatte aus Metall weiterhin über dem Steckplatz befindet. Wenn die Metallplatte entfernt wird, behindert dies den Luftstrom und eine angemessene Kühlung der Einheit.

Prerequisites

•Ensure you have a Phillips #2 screwdriver.

•Ensure you have securely installed the Voice Carrier Medium Module in the Secure Router 4134 chassis.

Procedure steps

Step Action

1Use a Phillips screwdriver to remove the slot cover plate from the slot in which you will install the Small Module.

2Align the Small Module with the slot and the slot module guides.

3Slide the Small Module into the Voice Carrier Medium Module until the Small Module connector touches the back panel of the Voice Carrier Medium Module.

4Push gently, but firmly, to seat the Small Module connector in the Voice Carrier Medium Module.

Nortel Secure Router 4134

Quick Start

NN47263-100 02.01 Standard

18 February 2008

Copyright © 2007, 2008 Nortel Networks

Image 45

Contents Quick Start Page Contents Introduction Power cord warning statement Copyright 2007, 2008 Nortel Networks FCC statement USA only International Regulatory Statements of ConformityCE marking statement Europe only EN 55022 statements TIA-968-AEN 300386 statement EN 55024 statementVcci statement Japan/Nippon only Bsmi statement Taiwan onlyMIC notice Republic of Korea only EN 60950 statement National Safety Statements of ComplianceNOM statement Mexico only Información NOM unicamente para MéxicoNational Environmental Statements of Compliance Denan statement Japan/Nippon onlyRoHS Directive Compliance Statement Weee Directive Compliance Statement Safety messagesWarnung Warnung Hardware Notice Risiko einer Augenverletzung durch Laser Foreign Exchange Station FXS Interface ModulesPersonal safety and equipment protection Foreign Exchange Office FXO Interface ModulesModule protection Electrostatic discharge Cables and connectors protectionAntistatic material Interface modules FeaturesNew in this release Navigation IntroductionIntroduction Secure Router 4134 installation and initial configuration Secure Router 4134 installation and initial configuration Copyright 2007, 2008 Nortel Networks Secure Router 4134 installation and initial configuration Step Action Unpacking and inspecting the Secure Router 4134 chassisSecure Router 4134 accessories Accessory Function Verified Installing a power supply modulePrerequisites Installing the mounting brackets on the chassisAverage time to install mounting brackets 2 minutes Prerequisites Installing the chassis Risk of injury Grounding the chassis Grounding the chassis Achtung Installing the interface modules Slot numbering legend printed on the Secure Router Foreign Exchange Office FXO Interface Modules Installing a Small ModuleInstalling a Large Module Installing a Medium ModuleInstalling a Small Module in the Voice Carrier Medium Module Voice Carrier Medium Module slot numbering Prerequisites Connecting AC power cables Connecting power cablesConnecting DC power Average time to install one DC power cable 3 minutes Switch off the DC power source Copyright 2007, 2008 Nortel Networks End Verifying a successful installation Powering up the routerLogon prompt appears on the console screen Copyright 2007, 2008 Nortel Networks Connecting a terminal for local access Configuring the Secure Router 4134 for remote accessEstablishing remote access Login admin Password setup Using SSH for remote accessEnable Changing the default administrator passwordChanging the default administrator password Configuring the Secure Router 4134 for remote access Appendix Environmental requirements Environmental requirements Class a device caution statement Appendix Translations of safety messagesCuidado Qualified service personnel warning statementAviso Overcurrent warning statementCover plate warning statement Power cord warning statement Peligro Page Quick Start