Nortel Networks 4134 quick start Risk of injury

Page 35

Installing the chassis 35

WARNING

Risk of injury

The Secure Router 4134 weighs approximately 25 lb (11.34 kg) with one power supply and the fan tray installed. To prevent injury, keep your back straight and lift with your legs, not your back.

WARNING

WARNUNG

Verletzungsrisiko

Der Secure Router 4134 wiegt mit einem Netzteil und dem Lüftereinsatz ungefähr 11,34 kg (25 lb). Um Verletzungen zu verhindern, halten Sie den Rücken gerade und heben Sie nicht mit dem Rücken, sondern den Beinen.

CAUTION

Risk of equipment damage

Only trained personnel can install this product.

CAUTION

ACHTUNG

Risiko eines Geräteschadens

Nur geschultes Personal kann dieses Produkt installieren.

CAUTION

Risk of equipment damage

To prevent damage from electrostatic discharge, always wear an antistatic wrist strap connected to an ESD jack.

CAUTION

ACHTUNG

Risiko eines Geräteschadens

Um Schäden durch elektrostatische Entladung zu verhindern, tragen Sie bei der Instandhaltung dieses Produkts immer ein antistatisches Band am Handgelenk, welches mit einer ESD-Buchse verbunden ist.

Prerequisites

•Confirm that your shipment is complete and undamaged.

•Ensure you have allotted adequate space in and around the equipment rack for installation of the Secure Router 4134.

•Ensure you have the screws that shipped with the chassis.

Nortel Secure Router 4134

Quick Start

NN47263-100 02.01 Standard

18 February 2008

Copyright © 2007, 2008 Nortel Networks

Image 35

Contents Quick Start Page Contents Introduction Power cord warning statement Copyright 2007, 2008 Nortel Networks FCC statement USA only International Regulatory Statements of ConformityCE marking statement Europe only EN 55022 statements TIA-968-AEN 300386 statement EN 55024 statementMIC notice Republic of Korea only Vcci statement Japan/Nippon onlyBsmi statement Taiwan only Información NOM unicamente para México National Safety Statements of ComplianceEN 60950 statement NOM statement Mexico onlyRoHS Directive Compliance Statement National Environmental Statements of ComplianceDenan statement Japan/Nippon only Weee Directive Compliance Statement Safety messagesWarnung Warnung Hardware Notice Risiko einer Augenverletzung durch Laser Foreign Exchange Station FXS Interface ModulesModule protection Personal safety and equipment protectionForeign Exchange Office FXO Interface Modules Electrostatic discharge Cables and connectors protectionAntistatic material Interface modules FeaturesNew in this release Navigation IntroductionIntroduction Secure Router 4134 installation and initial configuration Secure Router 4134 installation and initial configuration Copyright 2007, 2008 Nortel Networks Secure Router 4134 installation and initial configuration Step Action Unpacking and inspecting the Secure Router 4134 chassisSecure Router 4134 accessories Accessory Function Verified Installing a power supply modulePrerequisites Installing the mounting brackets on the chassisAverage time to install mounting brackets 2 minutes Prerequisites Installing the chassis Risk of injury Grounding the chassis Grounding the chassis Achtung Installing the interface modules Slot numbering legend printed on the Secure Router Foreign Exchange Office FXO Interface Modules Installing a Small ModuleInstalling a Large Module Installing a Medium ModuleInstalling a Small Module in the Voice Carrier Medium Module Voice Carrier Medium Module slot numbering Prerequisites Connecting AC power cables Connecting power cablesConnecting DC power Average time to install one DC power cable 3 minutes Switch off the DC power source Copyright 2007, 2008 Nortel Networks End Verifying a successful installation Powering up the routerLogon prompt appears on the console screen Copyright 2007, 2008 Nortel Networks Connecting a terminal for local access Configuring the Secure Router 4134 for remote accessEstablishing remote access Login admin Password setup Using SSH for remote accessEnable Changing the default administrator passwordChanging the default administrator password Configuring the Secure Router 4134 for remote access Appendix Environmental requirements Environmental requirements Class a device caution statement Appendix Translations of safety messagesCuidado Qualified service personnel warning statementAviso Overcurrent warning statementCover plate warning statement Power cord warning statement Peligro Page Quick Start