Status and Informational Screens
The following paragraphs describe the various status and informational screens that are available with the S10 and S15.
Status Screens
The most important status screens available after the Selftest has completed include:
•INPUT VOLTAGE: XXXV; OUTPUT VOLTAGE: XXXV
•SYSTEM LOAD: <XXXW; LOAD: <XXX%
•EST. RUNTIME: XHRS; FUEL: XXX%
INPUT VOLTAGE: XXXV; OUTPUT VOLTAGE: XXXV
This screen is shown in Figure 14 and, displays the actual input utility voltage level, as well as the actual voltage level being output to the connected devices.
Note: As shown in Figure 14, at times, the voltage values on this screen may not match. This may be because separate circuits are used to make these voltage measurements, and there is a time delay between the two circuits when updating this status screen. This condition is considered part of the normal operation of the unit. Also, the voltage values may not match if the AVR is active.