APC 6000 Rectifier-inverter cubicles, Static Switch cubicles, Pack Advance cubicles

Characteristics (cont.)

Rectifier-inverter cubicles

The parameters given in the table opposite can be used to determine the required rating of a single-unit or modular UPS, a frequency converter, or a parallel UPS with SSC.

Characteristics of rectifier-inverter cubicles

rated	cubicle	cubicle	cubicle	maximum
inverter	width W	height H	depth D	weight
output	in mm (1)	in mm	in mm	in kg
in kVA
250	1600	1900 ± 10	840	1650
300	1600	1900 ± 10	840	1650
400	1600	1900 ± 10	840	2030
450	1600	2000 ± 10	840	2070
500	1600	2000 ± 10	840	2205
600	3600	1900 ± 10	840	3500

(1)25 mm must be added on each side to the indicated cubicle width, i.e. 50 mm in all per cubicle. This applies to all cubicle installation cases.

When installing several cubicles, allow for a tolerance of 0/+3mm per metre.

Static Switch cubicles
	Characteristics of Static Switch Cubicles
	rated	cubicle	cubicle	cubicle	maximum	heat
	SSC	width W	height H	depth D	weight	losses (2)
	output	in mm (1)	in mm	in mm	in kg
	in kVA					in kW	in cal./s
	500	1000	1900 ± 10	840	350	2.9	696
800		1000	1900 ± 10	840	500	3.7	888
	1200	1600	1900 ± 10	840	1000	< 0.5	< 120
	2000	2450	1900 ± 10	840	1710	< 0.5	< 120

(1)25 mm must be added on each side to the indicated cubicle width, i.e. 50 mm in all per cubicle. This applies to all cubicle installation cases.

When installing several cubicles, allow for a tolerance of 0/+3mm per metre.

External maintenance bypass cubicles

Characteristics of external maintenance bypass cubicles

(Modular UPS with external maintenance bypass)

rated	cubicle	cubicle	cubicle	maximum
bypass	width W	height H	depth D	weight
in kVA	in mm (1)	in mm	in mm	in kg
1200	1200	1900 ± 10	840	450

(1)25 mm must be added on each side to the indicated cubicle width, i.e. 50 mm in all per cubicle. This applies to all cubicle installation cases.

When installing several cubicles, allow for a tolerance of 0/+3mm per metre.

"Pack Advance" cubicles

Characteristics of "Pack Advance"Cubicles

rated	cubicle	cubicle	cubicle	maximum	heat
SSC	width W	height H	depth D	weight	losses (2)
output	in mm (1)	in mm	in mm	in kg
in kVA					in kW	in cal./s
300	400	1900 ± 10	840	335	2.9	696
400	400	1900 ± 10	840	440	3.7	888
450	400	1900 ± 10	840	440	< 0.5	< 120

(1)25 mm must be added on each side to the indicated cubicle width, i.e. 50 mm in all per cubicle. This applies to all cubicle installation cases.

When installing several cubicles, allow for a tolerance of 0/+3mm per metre.

6739381EN/