APC 10-40 KVA 380/400/415 V manual Insert

6. Insert the	XR Battery Enclosure rear view		UPS rear view
interconnection plates
between the two			
enclosures. One is
positioned toward the			
front and the other			
toward the rear. Note		
how the “wings” on
the interconnection
plates rest in slots at
the top of the inner
panel on the XR
Battery Enclosure.

7.	Align the two	
	enclosures and level
	the three marked rows
	of bolt holes in one	
	enclosure with the	
	holes in the adjacent
	enclosure.
		
		

8.Push the two enclosures firmly together.

9.Bolt the two enclosures together by using the six M6x25 mm screws and nuts supplied in the kit: join one hole at

the front and one hole at the rear of the
enclosures on three levels.	UPS		XR
10.Position the last and third U-shaped		
floor anchoring bracket under the
adjacent enclosure (see previous
graphics) and insert a minimum of two
floor anchoring M8 screws (not
provided) through holes in the bottom
of the enclosure and through holes in		
the U-shaped floor anchoring bracket,
and into the predrilled floor holes, and
then fasten the screws.

10 Smart-UPS VT ® 10-40 kVA 380/400/415 V, 208/220 V, 200/208 V Battery Installation