APC 10-40 KVA 380/400/415 V manual Post-Installation Checklist

Page 4

Final Mechanical Assembly

20

Level the Enclosures (L-shaped Floor Anchoring Brackets)

and Install Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Level the enclosures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Install battery-securing and floor-anchoring brackets . . . . . . . . . 21

Reinstall the Enclosure Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Reinstall the cable landing cover plates and the bottom plates . .

22

Reinstall the top cover, battery compartment cover,

 

and the front panel

22

Specifications

23

Battery voltage and current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Recommended cable sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

EPO requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Torque specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Post-Installation Checklist

24

ii

Smart-UPS VT ® 10-40 kVA 380/400/415 V, 208/220 V, 200/208 V Battery Installation

Image 4
Contents Installation Page Contents Post-Installation Checklist Safety Important Safety Instructions Save These InstructionsPrepare for Floor-Anchoring optional System arrangementsFour one in each corner. Recommended floor bolt size M8 Model width 352 mm 13.85 Remove the front panel Prepare for CablesRemove the top cover Remove the cable landing cover and bottom plates Remove the XR Battery Modules Shaped floor Page Insert Install isolators Connect Power in Installations with BusbarsRun the Cables Install busbars UPS XR1 XR2 XR2 XR1 UPS See Connect the EPO on Connect Power in Installations with Cables Install power cablesFeed the cable up Connect Communication Cables Connect the EPO to the UPS and the XR Battery Enclosure Connect the EPOFinal Mechanical Assembly Level the enclosuresInstall battery-securing and floor-anchoring brackets Reinstall the Enclosure Plates Specifications Battery voltage and currentTorque specification Recommended cable sizesPost-Installation Checklist Page Page Page 990-1740D-001 11/2009