Unpacking and Inspection
Description
Receipt of DNH
Unpacking
Reporting Damage
This section provides the steps to follow when receiving and unpacking the Advance DataNET Hub (DNH).
When DNH is received, examine the shipping container for evidence of external damage. Outside damage may be an indicator of damage to the DNH. Record any external damage.
Open the carton containing the DNH and remove all packing material. Carefully remove the unit from the carton and inspect it for damage that may have occurred during transportation. Carefully examine shipped contents with those listed on the Bill of Lading. All items should match those on the Bill of Lading.
Perform the following inspections:
•Inspect DNH exterior for dents, chipped paint, scratches etc.
•Open DNH hinged top cover and visually inspect interior mounted assemblies, and connectors.
•If DNH is to be rack or wall mounted, be certain the proper mounting hardware is provided.
•Inspect all field wiring connectors and switches. There must not be any damage to these connectors or switches.
•Check internal power supply(s) for damage.
If there is any evidence of damage to the shipping carton or the DNH, notify the carrier and your local Siemens Applied Automation representa- tive. Keep all shipping materials as evidence of damage for carriers in- spection. Immediately contact your Siemens Applied Automation repre- sentative who will arrange for immediate repair or replacement. The Siemens Applied Automation Customer Service department can be con- tacted as follows:
Inside Oklahoma:
Outside Oklahoma:
Internationally:
16 • Installation |