Chapter 4
Command Summary
Command Descriptions
Description
Unique Commands
This chapter is intended for maintenance personnel.
This chapter provides definitions for all of the commands you will be us- ing for setup purposes or for performing test diagnostics.
These are the commands that are unique to the Advance DataNET Hub.
config address ip | Set the device IP address for this |
xxx.xxx.xxx.xxx |
|
|
|
config device id | Configure the DataNET hub device ID |
|
|
config display | Display the current |
|
|
config netmask | Set the IP subnetmask for this |
xxx.xxx.xxx.xxx |
|
|
|
config iproute | Set the default router IP address for this hub- |
xxx.xxx.xxx.xxx | half |
|
|
config timeserver | Configure the IP address of a DataNET time |
xxx.xxx.xxx.xxx | server |
|
|
date | Set/display time and date |
|
|
del | Delete selected SAT entries |
|
|
display | Display SAT table |
|
|
display links | Display link state table |
|
|
dn | Displays or edits the parameters for setup |
| time or window |
|
|
download | Download new hub firmware via the |
| Configuration port |
|
|
events on | Enable reporting of internal messages via the |
| internal buffer |
|
|
events off | Enable reporting of internal messages via the |
| internal buffer |
|
|
help | Lists available CLI commands |
|
|
list | List next 22 log events |
|
|
list nnn | List 22 events, starting with number nnn. |
|
|
Command Summary • 69 |