Siemens DataNET Hub (DNH) user manual Command Description, Help Command List Command

Command Description, Continued

“help” Command

“list” Command

This command generates a simple list of available commands.

Enter the list command at any time from the Configuration Management interface to see event buffer messages. The list command has an inter- nal current sequence number that is set to 1 each time a Configuration Management login occurs. The list command will show 21 messages each time it is entered, beginning with the current sequence number. The current sequence number is updated each time list is used. A new cur- rent sequence number can be entered with the list command:

local> list		10
10	LOG:Port 10: Start probing		09/27
08:14:22.42
11	LOG:User logged in		09/27
08:14:27.00
12	LOG:Port 10: Start link validation		09/27
08:14:29.92
13	LOG:Port 1: Start link validation		09/27
08:14:29.93
14	LOG:Port 10: Link up (this half)		09/27
08:14:33.92
15	LOG:Port 1: Link up (both halves)		09/27
08:14:33.93
16	LOG:Port 4: Start link validation		09/27
08:20:22.52
17	LOG:Port 6: Start link validation		09/27
08:20:22.56
18	LOG:Port 4: Link up (both halves)		09/27
08:20:26.52
19	LOG:Port 6: Link up (this half)		09/27
08:20:26.56
20	LOG:Port 5: Take port off-line		09/27
08:20:54.84
21	LOG:Port 7: Take port off-line		09/27
08:21:10.27
22	LOG:Port 7: Start test mode		09/27
08:21:13.07
23	LOG:Port 1: Link down (no carrier in three polls)		09/27
08:23:23.77
24	LOG:Port 1: Lost carrier		09/27
08:23:23.77
25	LOG:Port 1: Start probing		09/27
08:23:23.77
26	LOG:Port 1: Start link validation		09/27
08:23:46.32
27	LOG:Port 1: Link up (both halves)		09/27
08:23:50.32
28	LOG:Port 7: Stopped test mode		09/27
08:27:43.41
29	LOG:Port 7: Take port off-line		09/27
08:27:43.41
30	LOG:User logged out		09/27
08:34:45.48
31	LOG:User logged in		09/27
08:41:05.05

78 • Command Summary 2000585-001