Siemens DataNET Hub (DNH) user manual DataNET Channels, Recommended DataNET

Site Wiring Requirements, Continued

DataNET Channels

The DataNET channel connections can be either copper wire or fiber optic cable. The wiring method and cable type for DataNET is dependent upon the site requirements. For cable requirements see Table 2-1.

Table 2-1.	The following Table should be used when evaluating or selecting cable
Recommended DataNET	for an existing or new DataNET installation.
Cable
	Cable Type	Vendors & P/N	Installation Notes
	Fiber Optic	SAA P/N 1270002-002	New Installation as an
	MM 62.5/125; 2 Fiber	Industry Available from	alternative to copper
			cable
	Conductors	Multiple Vendors
			Max distance from Ana-
			lyzer to Hub or between
			Hubs 1520 meters
			(5000 ft)
	2- Conductor Copper	SAA P/N 1686002-001	Recommended for Sin-
	Wire	Belden P/N 9182	gle Channel
			Max distance from Ana-
		for
		Belden Armored Cable	lyzer to Hub or between
		order	Hubs 1520 meters
		SAAI P/N 1680000-002	(5000 ft)
	4-Conductor Copper	SAA P/N 1681000-003	Recommended for Dual
	Wire	Belden P/N SSD1743	Channel
			Max distance from Ana-
			lyzer to Hub or between
			Hubs 1520 meters
			(5000 ft)
	Ethernet Cat 5 Un-	SAA P/N 1681003-006	Recommended for
	shielded Twisted pair	Industry Available from	short distances or
	(UTP)		within shelters.
		Multiple Vendors
			Max distance from ana-
			lyzer to hub or between
			hubs 600 meters (2000
			ft)

20 • Installation 2000585-001