Toshiba TF 631 manual Preparation, Prepare and insert, Printer unit, Remove transport fittings

Preparation

Remove transport fittings:

Before you start to use your fax machine, please remove all transport fittings.

Prepare and insert the	1.	Pull the release button to open the fax
printer unit		machine.
In order to prevent any transport damage,
the high-quality printer unit of your new
fax machine is supplied with the additional
protection of special packaging. Please
also follow the enclosed instructions.
The printer unit consists of two separate
components, namely the drum unit and
the developer assembly. Remove these
two parts from their packaging and follow
the following instructions.	2.	Hold the ends of the developer assembly,
		and shake the assembly several times from
		side to side. This will loosen the toner.
	•	Avoid touching the metal roller.
	3.	Hold the developer assembly securely in one
		hand, and use your other hand to peel the
		protective film off from the toner cartridge.
	•	Avoid touching the protective film, as there
		may be toner residues on the film.
	4.	Take the drum unit and insert it into the
		developer assembly as detailed in the
		drawing.
	•	Any damage to the printer drum will impair
		the image quality. You must therefore never
		touch the green drum surface or expose the
		drum to direct sunlight for more than three
		minutes.
	5.	Use the green handles to hold the printer
		unit, and place the unit in the fax machine
		as detailed in the drawing.

6. Press lightly on the green rectangles on the drum unit so that the unit audibly clicks into position.

The printer unit must be removed before the machine is transported or moved.

TF 631 TOSHIBA Preparation 5 GB