Toshiba manual Your TF 461 as a printer, System requirements, Connecting the fax, Machine to

Your TF 461 as a printer

System requirements

Connect your TF 461 to a computer which meets the following system requirements:

CPU:

• i80386SX (or higher)

RAM:

• min. 4 MB

Hard disk space:

• min. 5 MB free space

Software:

•MS-DOS version 5.0 or higher;

•Microsoft Windows version 3.0/3.1 or higher (in extended -386 enhanced- mode)

•Microsoft Windows 95

•IBM OS/2 1.3/2.0 or higher

If you would like additional information for installing the printer drivers, you can read or print out the README.TXT file. After the printer driver has been installed, this file can be found in the directory \PRTCIJP.

Connecting the fax	1. Disconnect the TF 461 from the main
	supply.
machine to the
	2. Switch your computer off.
computer

The TF 461 has an 8-bit Centronics parallel interface. Perform the following steps to connect the TF 461 to your computer:

3.Connect a parallel cable to the corresponding socket on the rear of hte TF461.

Parallel printer cable not supplied.

4.Secure the connector on the parallel cable by means of the wire clips.

5.Connect the other and of the parallel cable to a spare parallel port on your PC.

Parallel cables should be no longer then 2 meters.

GB 60 Your TF 461 as a printer TOSHIBA TF 461