Toshiba TF 461 manual Configuration of the printer, Draft/ LQ printing, Paper orientation

Configuration of the printer

Draft/ LQ printing

A high print quality is not always necessary. For instance, if you want to make a test printout which is also quite large, then draft printing is an alternative. Fewer ink jets are used during the draft printing mode; this reduces the print quality and increases the print speed. In addition, ink consumption is reduced in this mode.

The setting is only effective if you use the PRN command at

the DOS level. If you are printing via the installed printer driver, e.g. under Windows, the print quality is controlled by the settings of the printer driver.

DRAFT/LQ

Lamp DRAFT/QUALITY is lit

DRAFT/LQ

Lamp DRAFT/QUALITY isnt lit

Press the DRAFT/LQ button

Draft printing is activated

Press the DRAFT/LQ button

Letter printing (factory setting) is activated

Paper orientation

You are able to choose between printing using the portrait format or using the landscape format. The portrait format is generally used for normal letters, and landscape format can be used for tables.

The setting is only effective if you use the PRN command at

the DOS-level. If you are printing via the installed printer driver, e.g. under Windows, the orientation is controlled by the settings of the printer driver.

FUNCTION

PROGRAM SETUP DATA REDIAL

3x

PAUSE

PRINTER SETUP

START

SET ORIENTATION

START

LANDSCAPE

REDIAL

PAUSE

PORTRAIT

START

To start the menu

Page through the menu...

...until you reach the desired menu item

Confirm with START

Confirm with START

Display the current orientation

Select the desired menu item

Confirm with START

GB 82 Configuration of the printer TOSHIBA TF 461