Reception of documents
FAX/TAD mode: (continued)
If you wish to operate your fax machine in the FAX/TAD mode, you also have to set the TAD time. This is the period in which the fax machine reacts to a fax signal. TAD time = length of recorded message + 10 seconds.
| Standby mode |
FUNCTION | Start the menu |
| |
PROGRAM SETUP DATA |
|
2 x | Confirm with START (2x) |
START |
|
PARAMETER NUMBER = | Make your selection |
| |
| Enter function number |
START
FAX MONITOR TIME =35
Confirm with START
Set TAD time
Enter the new time
Confirm with START
START
Press STOP, return to standby mode
STOP
Switching between reception modes
Press the RECEPTION key
The MANUAL, TEL/FAX and FAX/ TAD modes are all represented
LED “reception” is lit
AUTO RCV
Automatic reception is activated
Switch over the mode
by the MANUAL mode. The mode which is selected depends on the setting of the functions: (see page
•Function no. 38, reception type =TEL/ FAX: activate the TEL/FAX mode
•Function no. 39, ringing signals: number of ringing signals before your fax machine collects the call
•Function no. 36, synthetic ringing signal: number of ringing signals
(synthetic ringing tone) from the loudspeaker
For FAX/TAD setting:
•Function no. 38, reception type = FAX/TAD: activate the FAX/TAD mode
•Function no. 44, FAX/TAD duration: indication of the time during which the fax machine detects another fax machine (TAD timer /
LED “reception” off | Manual reception is activated |
|
TF 461 TOSHIBA | Reception of documents 19 GB |