3
English
Install Swivel Mount | 1 | |
1. Carefully screw swivel mount [07] onto threaded tube [04] or [05] | ||
| ||
until hand tight. |
|
2. Position the front of the swivel mount [07] towards the target area then carefully tighten the set screw with hex key [16].
CAUTION: DO NOT OVERTIGHTEN!
Overtightening of set screw can damage threads on pipe.
3.Turn security screw using a Phillips screwdriver until set screw cannot be seen through access hole in swivel mount [07].
2
[02], [03]
[04], [05]
[16]
[07] | [16] |
3 | [02], [03] |
[04], [05]
[07]
[02], [03]
[04], [05]
[07]
| 13 |