1. Introduction and Installation
1.5.2 Replacing the ink film
The included film roll is a starter ink film. To ensure that the unit operates properly, we recommend the use of Panasonic replacement film. See page 10 for accessory information.
LWe cannot be responsible for any damage to the unit or degradation of print quality which may occur from the use of
Important:
LRemove the recording paper and the paper tray beforehand, or the paper may misfeed or jam.
1Open the covers (see steps 1 to 3 on page 12).
2Remove the used core (1) and used ink film (2).
1
2
3Remove the stoppers (1) and tags (2) from the new ink film (3).
2
1
1
3
4Insert the ink film and close the covers (see steps 4 to 7 on page 12).
5Install the paper tray (page 14), then insert the recording paper (page 15).
1.6 Handset cord
Connect the handset cord (1).
1
1.7 Paper tray
Insert the tabs (1) on the paper tray (2) into the slots on the back of the unit (3).
2
1
3
14