2. Preparation
2.4 Date and time
You must set the date and time.
|
|
|
|
|
|
|
|
{SET} | {MENU} | ||
|
|
|
|
{<}{>}
1Press {MENU}.
SYSTEM SETUP
PRESS NAVI.[( )]
2Press {<} or {>} repeatedly to display the following.
SET DATE & TIME
PRESS SET
3Press {SET}.
LCursor () will appear on the display.
M:01/D:01/Y:03
TIME: 12:00AM
4Enter the current month/day/year by selecting 2 digits for each.
Example: August 10, 2003 Press {0}{8} {1}{0} {0}{3}.
M:08/D:10/Y:03
TIME: 12:00AM
5Enter the current hour/minute by selecting 2 digits for each. Press {*} to select “AM” or “PM”.
Example: 3:15PM (12 hour clock entry only)
1. Press {0}{3} {1}{5}.
M:08/D:10/Y:03
TIME: 03:15AM
2.Press {*} repeatedly to display “PM”.
M:08/D:10/Y:03
TIME: 03:15PM
6Press {SET}.
LThe next feature will be displayed.
7Press {MENU} to exit the program.
Note:
LThis information will be printed on each page transmitted from your unit.
LThe accuracy of the clock is approximately
±60 seconds a month.
To correct a mistake
Press {<} or {>} to move the cursor to the incorrect number, and make the correction.
18