1. Introduction and Installation
LMake sure the blue gear (1) and white gear (4) are installed as shown.
4
3
1
2
LMake sure that the ink film is wrapped around the blue core (3) at least once.
Correct
1 turn
Tight
3
Incorrect
The ink film is not wrapped around the blue core.
5Turn the blue gear (1) in the direction of the arrow until the ink film is tight (2).
1
2
Slack/Crease Reverse
6Close the back cover securely by pushing down on the notched area at both ends (1).
1
7Close the front cover securely.
13